C2N-CBD-P

The Cameo Standard Mount Keypad (C2N-CBD-P) from Crestron® presents a fresh, innovative concept in keypad design, featuring a highly configurable one-gang wall mount form factor that is at once inviting to the touch and appealing to the eye. The C2N-CBD-P easily installs alongside other low-voltage in-wall devices to deliver an advanced custom keypad control solution as part of a complete Crestron control system.

Customizable Buttons
Exquisitely simple yet highly customizable, a single Cameo Keypad can be configured easily by the installer to provide from two to eight buttons. Each keypad is actually furnished with an assortment of button caps in four different sizes to support a variety of physical layouts. Among these is a set of six button caps that are pre-labeled with icons for lighting dimmer control functions. Button caps may also be ordered with custom backlit engraving for any application.^[1]

Through programming, each button can be configured to use "button events," affording up to three separate functions per button by tapping, double-tapping, or holding the button. "Shift key" functionality is even possible, allowing any button to be held while pressing another.

Auto-dimming Backlight
High-quality backlit laser-engraving^[1] provides customizable button text that's easy to read under any lighting condition. A built-in light sensor controls the backlight intensity automatically to achieve a crisp, legible appearance in both darkened and fully lit rooms.

Enhanced LED Feedback
Six pinhead-sized white LEDs afford fully customizable feedback to enable clear indication of the status of each button's function. Ten built-in blink patterns allow all kinds of blinking LED feedback while simplifying programming and minimizing traffic on the Cresnet® network. Onboard bargraph logic allows the feedback LEDs to function as a 6-segment bargraph display, providing clear level indication while adjusting lighting and audio settings. Auto-dimming LED intensity ensures optimal visibility under varying lighting conditions.

Ambient Light Sensor
In addition to controlling the backlight and LED intensity, the built-in light sensor can also be utilized by the control system to support basic daylight harvesting and other programmatic functions.

Versiports
Dual Versiport control ports onboard the C2N-CBD-P provide a local interface for a range of devices including Crestron GLS Occupancy Sensors and Photocells, or any device providing a contact closure, DC voltage logic, or 0-10VDC analog control output. Using the Versiports, it's possible to add monitoring of room occupancy, ambient light level, door closures, and other conditions without having to home run extra wiring to the central equipment location.

Cresnet®
Reliable wired connectivity is afforded via the Cresnet network, utilizing a simple 4-conductor interface carrying 24 Volt DC power and bidirectional communications between the Cameo keypad and Crestron control system. Cresnet supports up to 252 keypads and other devices.

Standard Wall Mount
Cameo Standard Mount Keypads are designed for installation in a standard electrical wall box, perfect for installation in a multi-gang box alongside other low-voltage devices. Available in a selection of 12 "Smooth" and "Textured" finishes, Cameo Keypads match perfectly with popular off-the-shelf decorator-style faceplates. For the ultimate in style and elegance, Crestron offers our Ascent™ Solid Metal Faceplates for Cameo Keypads^[2], providing a contemporary architectural appearance in a range of luxurious designer finishes.

Emerge Alliance® Registered
This device is EMerge Alliance registered and designed to work within a 24VDC room-level power distribution system. The EMerge Alliance is a non-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of Emerge Alliance standards^[3]. Crestron is a proud member and supporter of the Alliance. For more information about Crestron Solutions for EMerge Alliance Applications visit: www.crestron.com/emerge.

• Stylish and versatile wall mount keypad
• Standard electrical box installation
• 12 color-matched smooth and textured finishes
• Ascent™ solid metal faceplates available separately^[2]
• Versatile combinations of 2 to 8 pushbuttons
• Installer-configurable with choice of 4 button sizes
• New "split" buttons for "up/down" and "on/off" functions^[4]
• "Button Events" enable tap, double-tap, and hold functionality
• Customizable backlit button engraving^[1]
• White LED feedback indicators
• Built-in LED blinking and bargraph logic
• Auto-dimmable backlight and LED intensity
• Ambient light sensor
• Dual Versiport interface for external sensors
• Quick and easy installation
• Cresnet® wired communications
• EMerge Alliance® Compatible

Notes:

1. Custom engraving sold separately.
2. Item(s) sold separately.
3. Information regarding the EMerge Alliance can be found at www.emergealliance.org
4. Split small buttons may be installed in the bottom two positions only.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

Ascent, Cameo, Cresnet, Crestron, and the Crestron logo are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. EMerge Alliance is a trademark or registered trademark of the EMerge Alliance in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.