facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

C2N-CBF-P

Cameo Tastenfeld, schmal zur Direktmontage

Kleine CAMEO Tastenfelder zur direkten Hohlwandinstallation, konfigurierbar mit hintergrundbeleuchteten gravierbaren Tasten, Neu: “Split-Tasten ” Aufnahme in den unteren beiden Tastenblöcken, Anpassung der Hintergrundbeleuchtung und LEDs, weiße Rückmelde LED, Bargraph für Echtzeit Status Rückmeldung, Cresnet Kommunikation, 2 “Versiports” (digital in/out, 0-10V) für direkten Anschluss der GLS Bewegungsmelder und Lichtsensoren.

C2N-CBF-P-A-T: mandelfarben
C2N-CBF-P-B-T: schwarz
C2N-CBF-P-W-T: weiß

Cameo LogoThe Cameo® Flush Mount Keypad (C2N-CBF-P) from Crestron® presents a fresh, innovative concept in keypad design, featuring a unique flush mount form factor that is at once inviting to the touch and appealing to the eye. As part of a complete Crestron control system, the C2N-CBF-P delivers a truly advanced custom keypad control solution with an incredibly small footprint and slim profile.

Customizable Buttons
Exquisitely simple yet highly customizable, a single Cameo Keypad can be configured easily by the installer to provide from two to eight buttons. Each keypad is actually furnished with an assortment of button caps in four different sizes to support a variety of physical layouts. Button caps may also be ordered with custom backlit laser engraving to clearly designate each button's function.[1]

Through programming, each button can be configured to use "button events," affording up to three separate functions per button by tapping, double-tapping, or holding the button. "Shift key" functionality is even possible, allowing any button to be held while pressing another.

Auto-dimming Backlight
High-quality backlit laser-engraving[1] provides customizable button text that's easy to read under any lighting condition. A built-in light sensor controls the backlight intensity automatically to achieve a crisp, legible appearance in both darkened and fully lit rooms.

Enhanced LED Feedback
Six pinhead-sized white LEDs afford fully customizable feedback to show the status of each button. Ten blink patterns are built in, enabling blinking LED feedback with simplified programming and reduced traffic on the Cresnet® network. Onboard bargraph logic allows the feedback LEDs to function as a 6-segment bargraph display, providing clear level indication while adjusting lighting and audio settings. Auto-dimming LED intensity ensures optimal visibility under varying lighting conditions.

Ambient Light Sensor
In addition to controlling the backlight and LED intensity, the built-in light sensor can also be utilized by the control system to support basic daylight harvesting and other programmatic functions.

Control Ports
Dual digital/analog input ports onboard the C2N-CBF-P provide a local interface for a range of devices including Crestron GLS Occupancy Sensors and Photocells, or any device providing a contact closure, DC logic, or 0-10VDC analog voltage. Using the control ports, it's possible to add monitoring of room occupancy, ambient light level, door closures, and other conditions without having to home run extra wiring to the central equipment location.

Cresnet®
Reliable wired connectivity is afforded via the Cresnet network, utilizing a simple 4-conductor interface carrying 24 Volt DC power and bidirectional communications between the Cameo keypad and Crestron control system. Cresnet supports up to 252 keypads and other devices.

Cameo Flush Mount
Its unique flush mount design affords Cameo a very discreet appearance occupying just one-third the space of a conventional keypad. Employing a smart spring clamp mounting system, the C2N-CBF-P installs easily in a drywall cutout without requiring a backbox. An optional mud ring mounting kit (MMK-G1-CBF-T[2]) is available to ensure a clean installation in plaster and drywall, and can also be used to retrofit the keypad into an existing 1-gang wall box[3]. Available in a selection of five "Textured" finishes, Cameo Flush Mount Keypads blend perfectly with any decor.

Ascent® Metal Faceplates
For the ultimate in style and elegance, Crestron offers the Ascent collection of solid metal faceplates (CBF-FP-ASCENT[2]), providing Cameo keypads with a contemporary appearance in a range of luxurious designer finishes.

EMerge Alliance RegisteredEMerge Alliance® Registered
This device is EMerge Alliance registered and designed to work within a 24VDC room-level power distribution system. The EMerge Alliance is a not-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of EMerge Alliance standards[4]. Crestron is a proud member and supporter of the Alliance. For more information about Crestron Solutions for EMerge Alliance Applications visit: www.crestron.com/emerge.

C2N-CBF-T Colors

Key Features

 

  • Stylish and versatile wall mount keypad
  • Slim, inconspicuous flush mount appearance
  • 5 color-matched textured finishes available
  • Ascent® solid metal faceplates available separately[2]
  • Versatile combinations of 2 to 8 pushbuttons
  • Installer-configurable with choice of 4 button sizes
  • "Split" buttons for "up/down" and "on/off" functions[5]
  • "Button Events" enable tap, double-tap, and hold functionality
  • Customizable backlit button engraving[1]
  • White LED feedback indicators
  • Built-in LED blinking and bargraph logic
  • Auto-dimmable backlight and LED intensity
  • Ambient light sensor
  • Dual digital/analog input ports for external sensors
  • Quick and easy installation
  • Cresnet® wired communications
  • EMerge Alliance® compatible

Notes:

  1. Custom engraving sold separately.
  2. Item(s) sold separately.
  3. Installation in a 1-gang electrical box using the MMK-G1-CBF-T Mud Ring requires application of drywall compound to cover gaps around the keypad faceplate.
  4. Information regarding the EMerge Alliance can be found at www.emergealliance.org
  5. Split small buttons may be installed in the bottom two positions only.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, Ascent, Cameo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. EMerge Alliance and the EMerge Alliance logo are either trademarks or registered trademarks of EMerge Alliance Corporation in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

Buttons
  Keypad Buttons Configurable for 2 to 8 single-action pushbuttons
  Button Events Programmable for Normal, Tap, Double-Tap, and Hold
  Button Caps Includes (2) large, (3) medium, (5) small, and (2 pair) split small button caps[5]. All button caps are blank. Custom backlit engraved button caps are available separately.
  Engraving Custom backlit engraved button caps available separately
  Backlight White LED backlight for button engraving, software-adjustable intensity, auto-dimmable
LED Indicators
  Feedback (6) White LEDs, one per each of 6 small button positions;
Programmable, auto-dimmable, software-adjustable intensity, 10 blinking patterns
  Bargraph (1) 6-segment bargraph display utilizing the 6 feedback LEDs
Light Sensor
  Photosensor for control of auto-dimming function;
Can be configured to report ambient light level to control system
Connectors
  NET 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
  INPUT 1 – 2 (1) 3-pin 3.5mm detachable terminal block comprising (2) digital/analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 200k Ohms, logic threshold 1.24 Volts DC;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 200k Ohms;
Programmable 5 Volts, 2k Ohms pull-up resistor per pin
Power Requirements
  Cresnet Power Usage 1 Watt (0.05 Amps @ 24 Volts DC)
Environmental
  Temperature 32° to 113°F (0° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 3.4 BTU/Hr
Construction
  Chassis Plastic
  Mounting Mounts in a drywall cutout using integral spring-clamp, optional mud ring or 1-gang adapter[3] sold separately
  Faceplates Plastic bezel included, optional Crestron CBF-FP-ASCENT series faceplate sold separately
Dimensions
  Height 3.21 in (82 mm)
  Width 1.76 in (45 mm)
  Depth 1.19 in (31 mm) without connector
Weight
  2.7 oz (75 g)

Publications

Spec Sheet

Spec Sheet (PDF - 1.1 M)
Rev. Date: 7/3/2013

Installation and Operations Guide

Installation And Operations Guide (PDF - 505 K)
Doc. No. 7063E
Rev. Date: 7/15/2013

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 112 K)
Rev. Date: 9/24/2010

Available Models

Model Description      

C2N-CBF-P-A-T

Cameo® Keypad, Flush Mount, Almond Textured

     

C2N-CBF-P-B-T

Cameo® Keypad, Flush Mount, Black Textured

     

C2N-CBF-P-DSK-T

Cameo® Keypad, Flush Mount, Dusk Textured

     

C2N-CBF-P-LAT-T

Cameo® Keypad, Flush Mount, Latte Textured

     

C2N-CBF-P-W-T

Cameo® Keypad, Flush Mount, White Textured

     

 

Available Accessories

Model Description      

CB2-BTNA-T

Large Backlit Engravable Button Cap for Cameo Keypads, Almond Textured

     

CB2-BTNB-T

Large Backlit Engravable Button Cap for Cameo Keypads, Black Textured

     

CB2-BTNDSK-T

Large Backlit Engravable Button Cap for Cameo Keypads, Dusk Textured

     

CB2-BTNLAT-T

Large Backlit Engravable Button Cap for Cameo Keypads, Latte Textured

     

CB2-BTNW-T

Large Backlit Engravable Button Cap for Cameo Keypads, White Textured

     

CB3-BTNA-T

Medium Backlit Engravable Button Cap for Cameo Keypads, Almond Textured

     

CB3-BTNB-T

Medium Backlit Engravable Button Cap for Cameo Keypads, Black Textured

     

CB3-BTNDSK-T

Medium Backlit Engravable Button Cap for Cameo Keypads, Dusk Textured

     

CB3-BTNLAT-T

Medium Backlit Engravable Button Cap for Cameo Keypads, Latte Textured

     

CB3-BTNW-T

Medium Backlit Engravable Button Cap for Cameo Keypads, White Textured

     

CB6-BTNA-T

Small Backlit Engravable Button Cap for Cameo Keypads, Almond Textured

     

CB6-BTNB-T

Small Backlit Engravable Button Cap for Cameo Keypads, Black Textured

     

CB6-BTNDSK-T

Small Backlit Engravable Button Cap for Cameo Keypads, Dusk Textured

     

CB6-BTNLAT-T

Small Backlit Engravable Button Cap for Cameo Keypads, Latte Textured

     

CB6-BTNW-T

Small Backlit Engravable Button Cap for Cameo Keypads, White Textured

     

CB6S-BTNA-T

Split Small Backlit Engravable Button Cap Pair for Cameo Keypads, Almond Textured

     

CB6S-BTNB-T

Split Small Backlit Engravable Button Cap Pair for Cameo Keypads, Black Textured

     

CB6S-BTNDSK-T

Split Small Backlit Engravable Button Cap Pair for Cameo Keypads, Dusk Textured

     

CB6S-BTNLAT-T

Split Small Backlit Engravable Button Cap Pair for Cameo Keypads, Latte Textured

     

CB6S-BTNW-T

Split Small Backlit Engravable Button Cap Pair for Cameo Keypads, White Textured

     

CBF-FP-ASCENT-A/BLK

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Anodized Black

     

CBF-FP-ASCENT-A/GRY

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Anodized Gray

     

CBF-FP-ASCENT-A/SLVR

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Anodized Silver

     

CBF-FP-ASCENT-P/GLD

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Polished Gold

     

CBF-FP-ASCENT-P/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Polished Nickel

     

CBF-FP-ASCENT-SAT/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, Satin Nickel

     

CBF-FP-ASCENT-3BTN-A/BLK

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Anodized Black

     

CBF-FP-ASCENT-3BTN-A/GRY

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Anodized Gray

     

CBF-FP-ASCENT-3BTN-A/SLVR

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Anodized Silver

     

CBF-FP-ASCENT-3BTN-P/GLD

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Polished Gold

     

CBF-FP-ASCENT-3BTN-P/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Polished Nickel

     

CBF-FP-ASCENT-3BTN-SAT/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3 Button, Satin Nickel

     

CBF-FP-ASCENT-3/2BTN-A/BLK

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Anodized Black

     

CBF-FP-ASCENT-3/2BTN-A/GRY

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Anodized Gray

     

CBF-FP-ASCENT-3/2BTN-A/SLVR

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Anodized Silver

     

CBF-FP-ASCENT-3/2BTN-P/GLD

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Polished Gold

     

CBF-FP-ASCENT-3/2BTN-P/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Polished Nickel

     

CBF-FP-ASCENT-3/2BTN-SAT/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 3/2 Button, Satin Nickel

     

CBF-FP-ASCENT-4/1BTN-A/BLK

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Anodized Black

     

CBF-FP-ASCENT-4/1BTN-A/GRY

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Anodized Gray

     

CBF-FP-ASCENT-4/1BTN-A/SLVR

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Anodized Silver

     

CBF-FP-ASCENT-4/1BTN-P/GLD

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Polished Gold

     

CBF-FP-ASCENT-4/1BTN-P/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Polished Nickel

     

CBF-FP-ASCENT-4/1BTN-SAT/NKL

Ascent® Solid Metal Faceplate for Cameo® Keypad, Flush Mount, 4/1 Button, Satin Nickel

     

MMK-G1-CBF-T

Mud Ring Mount Kit for Cameo® Flush Mount Keypads

     

CRESNET-HP-NP-TL-SP1000

Cresnet® "High-Power" Control Cable, non-plenum, teal, 1000 ft spool

     

CRESNET-HP-NP-TL-SP500

Cresnet® "High-Power" Control Cable, non-plenum, teal, 500 ft spool

     

CRESNET-NP-BK-B500

Cresnet® Control Cable, non-plenum, black, 500 ft box

     

CRESNET-NP-OR-B500

Cresnet® Control Cable, non-plenum, orange, 500 ft box

     

CRESNET-NP-TL-B250

Cresnet® Control Cable, non-plenum, teal, 250 ft box

     

CRESNET-NP-TL-B500

Cresnet® Control Cable, non-plenum, teal, 500 ft box

     

CRESNET-NP-TL-SP1000

Cresnet® Control Cable, non-plenum, teal, 1000 ft spool

     

CRESNET-NP-TL-SP500

Cresnet® Control Cable, non-plenum, teal, 500 ft spool

     

CRESNET-NP-YL-B500

Cresnet® Control Cable, non-plenum, yellow, 500 ft box

     

CRESNET-P-BK-SP500

Cresnet® Control Cable, plenum, black, 500 ft spool

     

CRESNET-P-OR-SP500

Cresnet® Control Cable, plenum, orange, 500 ft spool

     

CRESNET-P-TL-SP1000

Cresnet® Control Cable, plenum, teal, 1000 ft spool

     

CRESNET-P-TL-SP500

Cresnet® Control Cable, plenum, teal, 500 ft spool

     

CRESNET-P-YL-SP500

Cresnet® Control Cable, plenum, yellow, 500 ft spool

     

CCR-L-1

Crestron® Color Ring

     

CCR-FP-ASCENT-1

Ascent® Color Ring

     

Invitation to Tender

C2N-CBF-P-A-T (TXT - 814 B)
Letzte Änderung 11.11.2012

Invitation to Tender

C2N-CBF-P-B-T (TXT - 809 B)
Letzte Änderung 11.11.2012

Invitation to Tender

C2N-CBF-P-W-T (TXT - 807 B)
Letzte Änderung 11.11.2012