facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CLWI-SWEX

Funktastenfeld mit Schaltkontakt, 1-Kanal

Funk-Tastenfeld infiNET EX® mit 1 Schaltkreis, Schaltleistung 2A.
CLWI-SWEX-ANTH: anthrazit
CLWI-SWEX-W: weiß

The CLWI-SWEX delivers native Crestron® control to any light or other switched load, in new or retrofit 230 Volt applications. Featuring reliable infiNET EX® wireless technology, the CLWI-SWEX can be installed in virtually any location thanks to reliable mesh networking. Support for up to 2 Amp loads makes this switch perfect for most applications.

Field-Replaceable and Engravable Buttons
The CLWI-SWEX features engravable buttons that can be swapped out in the field. Change of room décor or functionality is easy to handle long after the dimmer or switch has been installed. Positive snap-on fittings require no tools. Configure the dimmer or switch with a large rocker, or any combination of up to two adjacent half-size rockers or triple button pad. Each CLWI-SWEX ships with a full assortment of blank buttons as well.

Integrated Keypad
Because the CLWI-SWEX is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to six buttons, the in-wall dimmer or switch serves as a great user control interface in any Crestron system. Its single-box form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room. Also available are aesthetically matched standalone keypads which use Cresnet® or infiNET EX® communications.

infiNET EX
Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption[1].

The CLWI-SWEX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3[2]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every non-battery-powered device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[1]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.

Streamlined Installation
In addition to field replaceable buttons, the CLWI-SWEX features screw-clamp connectors for simplified wiring while reducing installation time and material costs. So slim, the CLWI-SWEX can be installed in square gang boxes making them the perfect choice for both new and retrofit projects.

Key Features

 

  • Field replaceable and engravable buttons
  • Available in anthracite or white finishes
  • infiNET EX® robust communication
  • Configurable up to 6 buttons
  • Screw-clamp connectors for easy installation
  • Stylish bargraph LED array provides real-time status feedback

Notes:

  1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. Wireless networks composed predominantly of battery-powered devices may need additional infiNET EX expanders, such as the CLW-EXPEX or GLA-EXPEX (sold separately), or other non-battery powered infiNET EX devices to ensure proper functionality of the network and battery life for the devices. Refer to the Best Practices for Installation and Setup of Crestron RF Products, Doc. #6689 for complete system design guidelines, or contact Crestron True Blue Support for further assistance.
  2. Item(s) sold separately.
  3. Faceplate not included. Requires an FP-INTENSE or FP-PURE faceplate, available in 18 colors and finishes up to 5-gang in size. Contact Crestron International by phone: +32.15.50.99.50 or email: Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein! .

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, 3-Series, Cresnet, Crestron Green Light, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

Load Ratings
  Load Types Incandescent, Tungsten-Halogen, Magnetic Low Voltage, CFL, Fluorescent, Electronic Low Voltage, LED
  Maximum Load 2 Amps/AX
Power Requirements
  230 Volts AC, 50Hz, line power
Controls
  Buttons Configurable for 1 rocker (up/down), or any combination of up to 2 small rockers and/or 2 three-button pad;
maximum layout contains 6 buttons; each press configurable for up to 3 discrete functions via single click, double click and hold; programmable via control system
LED Indicator
  Feedback Up to (10) White LED pinholes, depending on button configuration
Wireless
  RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant
  Range (typical) Subject to site-specific conditions; range is increased by adding additional devices or wireless expander
  Gateway Requires a CEN-RFGW-EX RF gateway
Connections
  Hot (1) 14-12 AWG, screw terminal, line power input
  Neutral (1) 14-12 AWG, screw terminal, neutral input
  Load (1) 14-12 AWG, screw terminal, load output
  Ground

(1) screw post, ground

Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  1-gang mountable in a 35 mm deep square or round electrical box; gangable in horizontal and vertical positioning; Requires faceplate (not included)[1]
Dimensions
  Height 2.8 in (72 mm)
  Width 2.9 in (74 mm)
  Depth 1.3 in (33 mm) including front face w/ buttons
Weight
  TBD

 

 

Publications

Spec Sheet

Spec Sheet (PDF - 644 K)
Rev. Date: 7/3/2014

Installation Guide

Installation Guide (PDF - 2.11 M)
Doc. No. 7239A
Rev. Date: 1/10/2013

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Available Models

Model Description      

CLWI-SWEX-ANTH

In-Wall Switch, 230VAC, Anthracite

     

CLWI-SWEX-W

In-Wall Switch, 230VAC, White

     

 

Available Accessories

Model Description      

CEN-RFGW-EX

infiNET EX® Wireless Gateway

     

CEN-RFGW-EX-PWE

infiNET EX® Wireless Gateway w/PoE Injector

     

MC3

3-Series Control System® w/infiNET EX®

     

DIN-AP3MEX

DIN Rail 3-Series® Automation Processor w/infiNET EX®

     

CLW-EXPEX-GD-W-T

infiNET EX® Wireless Expander, Ground Pin Down, White Textured

     

GLA-EXPEX

Crestron Green Light® Wireless Expander for infiNET EX® Networks

     

Invitation to Tender

CLWI-SWEX-ANTH (TXT - 2.02 KB)
Letzte Änderung 02.09.2014

Invitation to Tender

CLWI-SWEX-W (TXT - 2.01 KB)
Letzte Änderung 02.09.2014