MP-B10

Tastentableau mit 10 Tasten und LED-Anzeige

Tastentableau mit 10 Tasten. Anbindung über Cresnet oder Ethernet an MPC-, MPS-Geräte oder konventionelle Crestron Steuerungssysteme. 10 Tasten mit LED Feedback, austauschbare Beschriftungen, Drehregler mit LED-Anzeige, 2 Cresnet Anschlüsse, 10/100 Ethernet, PoE (Power over Ethernet). Montage in Three-Gang-Box.

MP-B10-B-T: schwarz
MP-B10-W-T: weiß

Beschreibung
Daten
Downloads
Modelle & Zubehör
Ausschreibungstexte

The MP-B10 is an enhanced pushbutton control panel designed for installation in a wall or podium. It is ideal for expanding a Crestron MPC Media Presentation Controller™, or as a cost-effective user interface for a MPS Multimedia Presentation System or any other Crestron system. Available in white or black, the MP-B10 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.

Its 10 programmable "hard key" buttons can be freely programmed for any function such as system power, input source selection, transport control, and lighting presets. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software. Adjusting audio volume and other parameters is enabled using the continuous-turn control knob and LED bargraph.

A built-in IR receiver provides a gateway for Crestron IR wireless touchpanels and handheld remotes. A light sensor is also included, programmable for controlling the MP-B10's backlight intensity, or for providing ambient lighting level data to the control system for other applications. The MP-B10 may be powered through the network wiring using either Cresnet or PoE (Power-over-Ethernet), requiring just one wire for operation.

Wall mount pushbutton control panel
10 programmable buttons with LED feedback
Customizable backlit button labels
Volume control knob and LED bargraph
Built-in IR receiver and light sensor
Cresnet and 10/100 Ethernet
802.3af Power-over-Ethernet compatible
Rugged construction
3-gang wall-mountable

Ethernet
	10BaseT/100BaseTX, static IP or DHCP, DNS, full duplex, auto-switching, auto-negotiating, auto-discovery, TCP/IP, UDP/IP, CIP, IEEE 802.3u & 802.3af compliant
Connectors
	NET	(2) sets of (4) captive screw terminals; Cresnet slave port with parallel pass-thru
	LAN PoE	(1) 8-wire RJ45 with 2 LED indicators; 10BaseT/100BaseTX Ethernet port, 802.3af Power over Ethernet compliant; Bottom green LED indicates link status; Top green LED indicates Ethernet activity
	Computer	(1) USB Type B female (behind front cover); USB 1.1 computer console port for firmware upgrade
	Ground	(1) flying lead, chassis ground wire
Controls and Indicators
	Hard Keys	(10) Programmable pushbuttons with backlit labeling
	Feedback Indicators	(10) Programmable red LEDs (1 per hard key)
	VOLUME	(1) Programmable continuous turn rotary encoder
	Bargraph	(1) Programmable red 5-segment LED bargraph
	HW-R	(1) Recessed miniature pushbutton for hardware reset
	SETUP	(1) Recessed miniature pushbutton for setting up connection with the control system via Cresnet or Ethernet
Light Sensor
	Photosensor, programmable for auto-dimming of front panel labeling and other functions
IR Receiver
	Reception Frequency	36 to 38 kHz IR
	Formats	Crestron format, RC5
	Range	Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength
Power Requirements
	Cresnet Power Usage	4 Watts (0.17 Amps @ 24 Volts DC)
	Power over Ethernet	IEEE 802.3af Class 2 PoE Powered Device
	Note: If both PoE and Cresnet power are connected, power will be drawn from Cresnet.
Environmental
	Temperature	32° to 104°F (0° to 40°C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	14 BTU/hr
Enclosure
	Faceplate	High-impact plastic, black or white, with polycarbonate label overlay
	Chassis	Injection-molded plastic with steel mounting plate
	Mounting	Requires 3-gang plaster ring or electrical box (≥2 inch deep recommended)
Dimensions
	Height	4.50 in (11.43 cm)
	Width	6.70 in (17.02 cm)
	Depth	2.23 in (5.67 cm)
Weight
	17 oz (475 g)

Ships with these standard button labels

	Spec Sheet (PDF)
	Installation And Operations Guide (PDF - 2.44 M) Doc. No. 6702C Rev. Date: 8/6/2010

Zoomable Drawing

Cad Files (ZIP - 358 K)
Rev. Date: 6/23/2008

Model	Description
MP-B10-B-T	Media Presentation Button Panel B10, Black
MP-B10-W	Media Presentation Button Panel B10, White

Model	Description
MP/MPC/IPAC_FRONT_LABEL_ENGRAVED-B-T	Custom Engravable Backlit Labels, Black
MP/MPC/IPAC_FRONT_LABEL_ENGRAVED-W	Custom Engravable Backlit Labels, White
TTK-MP/MPC/IPAC-B-T	Table Mount Kit, Black
TTK-MP/MPC/IPAC-W	Table Mount Kit, White
SMK-MP/MPC/IPAC	Swivel Mount Kit
PWE-4803RU	PoE Injector
CEN-SW-POE-5	5-Port PoE Switch
CRESNET-NP-BK-B500	Cresnet® Control Cable, non-plenum, black, 500 ft box
CRESNET-NP-OR-B500	Cresnet® Control Cable, non-plenum, orange, 500 ft box
CRESNET-NP-YL-B500	Cresnet® Control Cable, non-plenum, yellow, 500 ft box
CRESNET-NP-TL-B250	Cresnet® Control Cable, non-plenum, teal, 250 ft box
CRESNET-NP-TL-B500	Cresnet® Control Cable, non-plenum, teal, 500 ft box
CRESNET-NP-TL-SP500	Cresnet® Control Cable, non-plenum, teal, 500 ft spool
CRESNET-NP-TL-SP1000	Cresnet® Control Cable, non-plenum, teal, 1000 ft spool
CRESNET-P-BK-SP500	Cresnet® Control Cable, plenum, black, 500 ft spool
CRESNET-P-OR-SP500	Cresnet® Control Cable, plenum, orange, 500 ft spool
CRESNET-P-YL-SP500	Cresnet® Control Cable, plenum, yellow, 500 ft spool
CRESNET-P-TL-SP500	Cresnet® Control Cable, plenum, teal, 500 ft spool
CRESNET-P-TL-SP1000	Cresnet® Control Cable, plenum, teal, 1000 ft spool
CRESNET-HP-NP-TL-SP500	Cresnet® "High-Power" Control Cable, non-plenum, teal, 500 ft spool
CRESNET-HP-NP-TL-SP1000	Cresnet® "High-Power" Control Cable, non-plenum, teal, 1000 ft spool

	MP-B10-B-T (TXT - 1 KB) Letzte Änderung 11.11.2012
	MP-B10-W-T (TXT - 1023 B) Letzte Änderung 11.11.2012