facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

C2N-UNI8IO

Tasteninterface (55 mm Schalterdose)

Tasteninterface mit Cresnet-Busanschluss für bis zu 8 potentialfreie externe Tasten. Zur Rückmeldung stehen 8 umschaltbare Ausgänge zum Betrieb von LEDs oder Anzeigelampen oder auch zum Schalten von externen Relais zur Verfügung. Input: 0-24VDC, 1 bis 3,7 mA. Output: 24VDC, 100 mA je Out, max 500 mA pro Modul. Einbau in 55 mm UP-Dose. Interface auch passend für unsere NIKO Schalterserie.

The C2N-UNI8IO is a compact interface which allows a third-party keypad to be connected directly to the Cresnet® control network. Its low-profile design makes the C2N-UNI8IO excellent for installation directly inside a 55mm European electrical box or other suitable enclosure. Supporting up to 8 buttons and indicators, the universal keypad interface can be used in a variety of applications including homes and offices where custom styling is of the most importance, or museums and courtrooms where simple user interfaces are required.

Because it supports contact closure inputs, the C2N-UNI8IO can transform virtually any button or switch into a Cresnet device. The simple low-voltage, 4-wire bus makes Cresnet the smart choice in wiring infrastructure, allowing daisy chaining of devices for present or future needs. Simply add door sensors to systems providing indication of entry or exit, or take a doorbell to the next level by triggering the audio system when "rung."

More than just an input interface, 8 low-voltage outputs are capable of driving LEDs, relay coils, or lamps. Visual feedback is natively supported with the C2N-UNI8IO because it's capable of delivering various light intensities and blinking patterns to LEDs. Just as Crestron keypads indicate which source is selected or what lighting scene has been chosen, the universal keypad interface lets any keypad follow suit.

Key Features

 

  • Transforms a third-party keypad into a Cresnet® device
  • Low-profile design fits in 55mm European electrical box
  • Supports 8 buttons and indicators
  • Drives up to 8 LEDs for feedback

Notes:

  1. Actual load capability dependent upon the amount of available Cresnet power in the system.

Connectors
  NET (1) 4-pin 3.5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network
  INPUT (1) 10-pin 0.1” IDC connector, includes (10) single conductor 22 AWG 3” flying leads
Inputs comprised of (2) GND references and (8) digital inputs (referenced to GND);
  OUTPUT (1) 10-pin 0.1” IDC connector, includes (10) single conductor 22 AWG 3” flying leads Outputs comprised of (1) 24VDC, (1) 5VDC, and (8) digital outputs (referenced to GND);
Note: 24V connector is a Cresnet power pass-thru
Ratings
  Digital Inputs (8) Inputs rated for 0-24 Volts DC, includes 10K ohm pull-up to 5VDC
Logic Low Threshold: ≤1 Volt Logic High Threshold: ≥3.7 Volts
  Digital Outputs (8) Open drain outputs rated for 100mA @ 24VDC, 500mA max (combined for all 8 outputs), when not in "current limit" mode
Maximum Power Load: 1A @ 24VDC[1] and 40mA @ 5VDC
Controls & Indicators
  SETUP (1) Red LED and (1) miniature pushbutton, used for touch-settable ID (TSID)
  OUTPUT CURRENT LIMIT (1) 8-position DIP switch, engages 1K ohm current limiting resistor per output, limits each output to 5mA @ 5VDC for use with LEDs
Note: When in “current limit” mode, be sure to not exceed the above rating.
Power Requirements
  Cresnet Power Usage 0.5 Watts (0.02 Amps @ 24 Volts DC)
Does not account for LED, bulbs, or other device's power consumption.
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 95% RH (non-condensing)
Dimensions
  Height 2.06 in (52.3 mm)
  Width 2.05 in (51.9 mm)
  Depth 0.68 in (17.3 mm)
Weight
  0.815 oz (23.1 g)

C2N-UNI8IO Lighting Control
Models Included: C2N-SDC, C2N-UNI8IO, CHV-THSTAT, CLS-C6, GLS-ODT-C-500, PAC2M, TPS-4L

C2N-UNI8IO with a typical lighting automation control system.

Application Diagram (PDF - 1.31 M)
Rev. Date: 1/7/2011

Application Diagram

C2N-UNI8IO with DIN-Rail
Models Included: C2N-SDC-DC, C2N-UNI8IO, CHV-THSTAT, DIN-1DIMU4, DIN-AP2, DIN-BLOCK, GLS-ODT-C-500, TPS-4L

C2N-UNI8IO with typical DIN-rail lighting automation system.

Application Diagram (PDF - 1.05 M)
Rev. Date: 3/31/2010

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF - 819 K)
Rev. Date: 10/17/2013

Manual

Manual (PDF - 1.43 M)
Doc. No. 6956B
Rev. Date: 8/6/2010

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 871 K)
Note: CAD Drawing for C2N-UNI8IO-D
Rev. Date: 4/14/2014

Cad Files

Cad Files (ZIP - 877 K)
Note: CAD Drawing for C2N-UNI8IO
Rev. Date: 4/15/2014

Available Models

Model Description      

C2N-UNI8IO

Universal Keypad Interface

 

 

 

Invitation to Tender

C2N-UNI8IO (TXT - 661 B)
Letzte Änderung 11.11.2012