| Processor |
|
|
CPU |
32-bit Freescale ColdFire® Microprocessor |
| Memory |
|
|
SDRAM |
32 MB |
|
|
NVRAM |
1 MB |
|
|
Flash |
8 MB |
|
|
Power Failure Memory |
10 years |
| Time Clock |
|
|
Accuracy |
±1 minute per year |
| Operating System |
|
|
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; includes default program for Green Light Power Switching systems |
| Ethernet |
|
|
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP, DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView® applications |
| Connectors |
|
|
NET |
(2) sets of (4) captive screw terminals;
Cresnet port and 24 Volt DC power input with parallel pass-thru;
Connects to GLPS switching panels, GLS sensors (via GLS-SIM modules), and keypads (CNX-B, C2N-DB, C2N-CBD-TS, or C2N-CBF-T);
Default program supports up to 9 panels with 42 loads each, 40 sensors (via 20 GLS-SIM modules), and 16 keypads via Cresnet |
|
|
LAN |
(1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity |
|
|
Ground |
(1) flying lead, chassis ground wire |
|
|
COM 1* |
(5) captive screw terminals;
Bidirectional RS-232 port;
Up to 115.2k baud; hardware and software handshaking support |
|
|
COM 2* |
(3) captive screw terminals;
Bidirectional RS-232 port;
Up to 115.2k baud; software handshaking only |
|
|
RELAYS 1 – 4* |
(6) captive screw terminals comprising (4) normally open, isolated relays (every two share a common);
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts |
|
|
INPUTS 1 – 4 |
(5) captive screw terminals comprising (4) digital or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.25 Volts DC;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin;
Default program supports connection of one occupancy sensor or photo sensor (Input 1), one Override signal (Input 2), and Lockout signals for the IPAC front panel or external keypads (Inputs 3 and 4) |
|
|
Computer |
(1) USB Type B female (behind front cover);
USB 1.1 computer console port (cable included) |
| LCD Display |
|
|
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight |
| Controls and Indicators |
|
|
Selection Knob |
(1) continuous turn rotary encoder, adjusts menu parameters |
|
|
ENTER |
(1) pushbutton, selects underlined item and stores settings |
|
|
HOME |
(1) pushbutton, returns to the home page |
|
|
BACK |
(1) pushbutton, returns to the previous page |
|
|
CANCEL |
(1) pushbutton, cancels current action without saving |
|
|
HELP |
(1) pushbutton, opens context-sensitive help screen |
|
|
Soft Keys |
(4) pushbuttons for activation of LCD driven functions |
|
|
Function Buttons |
(7) Programmable pushbuttons with backlit label slot |
|
|
Feedback Indicators |
(7) Programmable red LEDs (1 per Function Button) |
|
|
HW-R |
(1) Recessed miniature pushbutton for hardware reset (reboots the processor) |
|
|
SW-R |
(1) Recessed miniature pushbutton (behind front cover) for software reset (restarts the SIMPL program) |
| Light Sensor |
|
|
Photosensor, programmable for auto-dimming of front panel label backlight and other functions
|
| IR Receiver* |
|
|
Reception Frequency |
36 to 38 kHz IR |
|
|
Formats |
Crestron format, RC5 |
|
|
Range |
Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength |
| Power Requirements |
|
|
Cresnet Power Usage |
10 Watts (0.42 Amps @ 24 Volts DC);
GLA-PWS50 or equivalent power supply required (sold separately) |
|
|
Available Cresnet Power |
40 Watts using GLA-PWS50 power supply (sold separately) |
| Environmental |
|
|
Temperature |
32° to 104°F (0° to 40°C) |
|
|
Humidity |
10% to 90% RH (non-condensing) |
|
|
Heat Dissipation |
20 BTU/hr |
| Enclosure |
|
|
Faceplate |
High-impact plastic, black or white, with polycarbonate label overlay |
|
|
Chassis |
Injection-molded plastic with steel mounting plate |
|
|
Mounting |
Requires 3-gang plaster ring or electrical box (≥2.5 inch deep recommended) |
| Dimensions |
|
|
Height |
4.50 in (11.5 cm) |
|
|
Width |
6.70 in (17.1 cm) |
|
|
Depth |
2.23 in (5.7 cm) |
| Weight |
|
|
1.4 lb (0.64 kg) |
| Testing & Compliance |
|
|
UL Listed, FCC Part 15, CEC Title 24 |
