facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

MC2E

Steuerungssystem mit Ethernet

Steuerungen Serie 2
Diese Steuerzentralen sind ausgestattet mit COLDFIRE-Prozessor mit 66Mips/266 Mips und frei programmierbar mit Simpl und Simpl+.

Komplettes Steuerungssystem, 1HE, 32 Bit Motorola ColdFire Prozessor, Anschluss für CresNet Bus, 2 bidirektionale RS-232/422/485 Schnittstellen, 4 IR/unidirektionale RS-232 Schnittstellen, 4 Relaisausgänge, 4 Digitale Ein-/Ausgänge oder analoge Eingänge, 1 x IR-Empfänger (benötigt wird ein CNXRMIRD), Ethernetport, Ethernetschnittstelle mit eigenem Webserver, Netzteil enthalten.

Crestron® 2-Series Control Systems are the brain of a complete integrated AV or automation solution. Every audio, video, and environmental element of the home, boardroom, classroom, or command center becomes integrated and accessible through the control system. Crestron 2-Series control systems are unmatched for power, performance and scalability, providing the ideal choice for today's demanding control applications.

The MC2E is a low-cost 2-Series Ethernet control system ideally suited for any application requiring the powerful control engine and Ethernet connectivity of larger Crestron control systems, but with fewer control ports. The MC2E features two built-in COM ports, four IR/Serial ports, four I/O Versiports, four isolated relays, and Ethernet for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors.

2-Series Engine
At the heart of the MC2E is the powerful 2-Series engine. Our exclusive enhanced real-time operating system makes the MC2E the fastest, most reliable control system available.

Cresnet®
Cresnet is the communications backbone for many Crestron touchpanels, keypads, lighting controls, and other devices. The Cresnet bus is a simple, yet flexible 4-wire network that provides rock-solid bidirectional communication for numerous Cresnet devices.

Cresnet Slave Mode
Selectable Cresnet Slave Mode enables the MC2E to be configured as a Cresnet slave device, effectively transforming it into a Cresnet expansion module. Such flexibility can offer a cost-effective solution for system expansion, providing a host of additional control ports in a single module.

Ethernet
Crestron pioneered the IP-based control system to harness the vast possibilities of Ethernet and the Internet for remote control, monitoring, programming, and diagnostics. The MC2E is designed to deliver the world's most advanced IP control solution with full-duplex 10/100 Ethernet, built-in Web server and email client, and support for both static and dynamic IP addressing.

e-Control®2
Our award-winning e-Control 2 XPanel solutions offer the most flexible range of IP control possibilities available. Using a computer or mobile device, e-Control 2 provides an amazing control GUI that looks and behaves just like a Crestron touchpanel.

RoomView™
Every Ethernet-enabled 2-Series control system works directly with Crestron's exclusive RoomView Help Desk software for the industry's most comprehensive facility-wide asset management solution.

SNMP
Built-in SNMP support enables network management of Crestron control systems using third-party SNMP software. As an alternate or supplement to RoomView, SNMP allows full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.

SSL
All Ethernet-enabled 2-Series control systems support SSL (Secure Sockets Layer), the industry standard for protecting sensitive network communications.

IR Wireless Option
When equipped with an optional CNXRMIRD IR receiver, the MC2E provides a low-cost wireless control solution using any Crestron IR wireless touchpanel, or a third-party universal IR remote.

Key Features

 

  • 2-Series engine | Dual-bus architecture
  • Cresnet port - master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2 and RoomView enabled | SNMP support
  • 2 Com ports (RS-232/422/485)
  • 4 IR/serial ports
  • 4 Versiport I/O ports
  • 4 Low-voltage relay ports
  • IR wireless compatible using CNXRMIRD
  • External power pack included
  • Single-space EIA rack-mountable

Notes:

    This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

    Crestron, Cresnet, e-Control, RoomView, SIMPL Windows, SIMPL+, and SystemBuilder are trademarks or registered trademarks of Crestron Electronics, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others.

Memory
SDRAM 32 MB
NVRAM 256 KB
Flash 4 MB
Operating System
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL Windows™ and SIMPL+®
Ethernet
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
COM A - B (2) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator
INFRARED-SERIAL OUTPUT A - D (4) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
I/O Versiports 1 - 4 (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
RELAY OUTPUT 1 - 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
IR IN (1) 3-pin 3.5mm detachable terminal block;
For connection of the CNXRMIRD IR Receiver (sold separately);
Allows IR wireless control from Crestron or third-party remotes using RC-5 IR commands
LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
COMPUTER (1) DB9 female, RS-232 computer console port
NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input;
(PW-2420RU power pack included);
Passes through to NET port to power Cresnet devices
Reset Buttons
HW-R Hardware reset (reboots the control system)
SW-R Software reset (restarts the SIMPL program)
LED Indicators
PWR (1 green) Indicates DC power supplied to unit
NET (1 yellow) Indicates Cresnet bus activity
MSG (1 red) Indicates control system has generated an error message
LNK (1 red) Indicates a valid connection on LAN port
ACT (1 red) Indicates activity on LAN port
Power Requirements
Power Pack 2.0 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
Available Cresnet Power 38 Watts using PW-2420RU power pack (included)
Cresnet Power Usage 12 Watts (0.5 Amp @ 24 Volts DC) using Cresnet network power (no power pack connected to the 24VDC connector)
Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Enclosure
Chassis Metal, black matte finish
Faceplate Extruded aluminum, black matte finish with polycarbonate label overlay
Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height 1.80 in (46 mm);
1.70 in (44 mm) without feet
Width 17.03 in (433 mm);
19.0 in (483 mm) with ears
Depth 8.65 in (220 mm)
Weight
4.3 lbs (2.0 kg)

QuickMedia Centralized Equipment
Models Included: MC2E, QM-AMP3X80MM, QM-FTMC, QM-MD5X1, QM-RX

For applications employing a centrally located equipment cabinet with permanently mounted AV and computer sources. Scenario includes MC2E, QM-MD5X1, QM-FTMC, QM-RX, QM-AMP3X80MM, CRESCAT-QM and RoomView. A complete multimedia signal routing, processing, and control solution with remote access and central management.

Application Diagram (PDF - 265 K)
Rev. Date: 6/26/2008

Application Diagram

QuickMedia System #2
Models Included: C2N-DB12, MC2E

QuickMedia System Featuring MC2E and C2N-DB12.

Application Diagram (CAD/ZIP - 428 K)
Rev. Date: 2/6/2007

Application Diagram

QuickMedia System #8
Models Included: MC2E, QM-AMP3X80MM, QM-FTMC, QM-MD5X1, QM-RX

QuickMedia System Featuring QM-RX, QM-FTMC, QM-MD5X1, QM-AMP3X80MM, and MC2E.

Application Diagram (CAD/ZIP - 847 K)
Rev. Date: 2/6/2007

Application Diagram

TPS-17G-QM - Conference Room Application
Models Included: MC2E, QM-AMP3X80MM, QM-FTCC, QM-MD7X2, QM-MD8X8, QM-RX, TPS-17G-QM

TPS-17G-QM in conference room application serving two displays and two projectors. Provides conference room table and lectern inputs, speech and stereo program amplification, and RoomView remote management.

Application Diagram (PDF - 4.11 M)
Rev. Date: 3/4/2009

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 1.0 M)
Doc. No. 6142A
Rev. Date: 6/1/2007

Reference Guide

Reference Guide (PDF - 3.4 M)
Doc. No. 6256A
Rev. Date: 3/1/2006
Note: This file incorporates four previously released documents:

  • Console Commands for 2-Series Control Systems
  • Error Messages for 2-Series Control Systems
  • Isys Join Number Remapping
  • Master-Slave Mode Reference Guide

Engineering Specs

Engineering Specs (PDF - 17 K)
Rev. Date: 11/4/2004

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 295 K)
Rev. Date: 2/24/2005

Available Models

Model Description

MC2E

Compact Control System with Ethernet

 

 

 

 

Included Accessories

Model Description

PW-2420RU

Power Pack, Desktop, 24VDC, 2A (50 Watts), Regulated, US/International
Included Quantity: 1

 

 

 

 

Available Accessories

Model Description

C2N-HBLOCK

Multi-type Cresnet Distribution Block

 

 

 

CNSP-XX

Custom Serial Interface Cable

 

 

 

CNXRMIRD

IR Receiver

 

 

 

IRP2

IR Emitter Probe

 

 

 

Invitation to Tender

MC2E (TXT - 967 B)
Letzte Änderung 11.11.2012