facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

PAC2M

Steuerungssystem

Steuerungen Serie 2
Diese Steuerzentralen sind ausgestattet mit COLDFIRE-Prozessor mit 66Mips/266 Mips und frei programmierbar mit Simpl und Simpl+.

Komplettes Steuerungssystem, ideal geeignet für Crestron Home, Crestron Licht- und Gebäudemanagementsysteme, Schaltschrankmontage, 32 Bit Motorola ColdFire Prozessor. Flash ROM für den Programmspeicher. Enthalten sind: Programmspeicher 1 GB, 4 Relais, 4 digitale Ein- / Ausgänge oder analoge Eingänge, 10/100 Ethernetport Ethernetschnittstelle mit eigenem Webserver, Systemhub mit 2x4 Cresnet-Ports, „Override“ - Funktionseingang. Nur 5 W Leistungsaufnahme. Externes Netzteil 24 V erforderlich.

The PAC2M is a compact, low-cost alternative to the PAC2 designed for small lighting and automation applications. At half the size of a PAC2, the PAC2M is perfect for apartments and smaller homes as well as individual meeting rooms and lecture halls.

2-Series Control System
Built upon Crestron's reliable 2-Series control engine, the PAC2M is extensively programmable using Crestron's suite of powerful development software and vast database of drivers and software modules. The PAC2M works seamlessly with Crestron's entire line of lighting dimmers and shade controls, keypads and touchpanels, thermostats, wireless gateways, and expansion modules.

System Integration
The PAC2M provides for the integration of non-Crestron devices and subsystems through a host of control interfaces. Four isolated relays and four digital input ports are built in to accommodate motion sensors, contactors, door strikes, and other low-voltage controls. Additional relays, I/O ports, serial COM ports, DTMF interfaces, and shade controllers can be added using Crestron expansion modules at any location throughout a commercial or residential facility.

Modular Enclosure Installation
The PAC2M is designed to install in a CAEN or CAENIB automation enclosure and provide a direct bus to a cabinet full of CLX-Series lighting control modules. It is also suitable of surface mount installation without an enclosure where allowed. Every Crestron lighting system is completely modular and scalable, allowing virtually unlimited configuration and expansion flexibility.

Cresnet® Distribution
Cresnet is the communications backbone for Crestron lighting modules, wall box dimmers, thermostats, keypads, and many other devices. This flexible 4-wire bus streamlines the wiring of a complete Crestron lighting system. The PAC2M provides connectivity for numerous Cresnet devices on multiple homeruns via 8 separate Cresnet ports. Its built-in Cresnet hub provides 2 isolated segments, each supporting 3000 feet of cabling and approximately 20 Cresnet devices. The Cresnet ports are arranged into 2 separate power groups providing a clean, flexible 24 Volt DC power distribution solution. An external power supply is required (sold separately).

Ethernet and e-Control®2
Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. Native features include a built-in email client to report system troubles and other functions to the owner or service company via instant email notification. An onboard Web server provides the foundation for Crestron's exclusive e-Control 2 XPanel technology, providing secure IP-based remote control.

RoomView® and SNMP
For large facilities utilizing multiple PAC2M's and other control systems, Crestron's exclusive RoomView Help Desk software delivers a comprehensive solution for remote monitoring and asset management. Also, built-in SNMP support enables similar capability using third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.

Override
An override input is provided to allow an external contact closure to bypass the PAC2M and activate a preset override state in each connected lighting module.

Memory Expansion
A memory card slot allows for easy expansion of the PAC2M's internal memory using any MMC-compatible memory card up to 1 GB.

D3 Pro™ Software
Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional.

Key Features

 

  • 2-Series control engine
  • MMC memory expansion card slot
  • Built-in Cresnet distribution and hub/repeater
  • 10/100 Ethernet capable | SSL encryption
  • e-Control 2, SNMP, & RoomView support
  • 4 relay and 4 digital input control ports
  • Occupies a single module space in any CAEN enclosure
  • Surface-mountable without an enclosure
  • Configurable via Crestron D3 Pro software
  • Requires external power supply

Processor
CPU 32-bit Freescale ColdFire® Microprocessor
Memory
SDRAM 32 MB
NVRAM 256 KB
Flash 8 MB
Memory Flash expandable up to 1 GB using MMC compatible card (not included)
Operating System
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®
Ethernet
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
LEFT (1) 5-pin 0.156 inch header;
Module interconnect port, connects to CLX-Series lighting control modules using interconnect cables provided
Cresnet Hub/Repeater Cresnet data and power distribution:

NET A – B: (8) 4-pin 3.5mm detachable terminal blocks comprising (4) Cresnet ports (paralleled) per each of (2) segments

G/INT/EXT A – B: (2) 3-pin 3.5mm detachable terminal blocks;
Cresnet power selection connectors for each segment;
Connect to external Cresnet power supply, or to “internal” power source via jumpers, to power Cresnet devices connected to the NET ports;
Maximum Load per Segment using external supply: 75 Watts (3.125 Amps @ 24 Volts DC);
Maximum Total Load using “internal” source: 45 Watts (1.88 Amps @ 24 Volts DC)

OVERRIDE (1) 2-pin 3.5mm detachable terminal block;
Input from external contact closure to trigger the preset Override state in CLX-Series modules connected to the module interconnect port;
Maximum Input: 10mA at 5 Volts
POWER (1) 2-pin 3.5mm detachable terminal block;
24 Volt DC power input, 2 Amp maximum;
Paralleled with 24VDC input;
Powers processor and provides “internal” power source for modules and Cresnet devices
RELAY OUTPUT 1 – 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
INPUT 1 – 4 (1) 5-pin 3.5mm detachable terminal block;
Comprises (4) digital inputs;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal
24VDC (1) 2.1mm barrel DC power jack;
24 Volt DC power input, 2 Amp maximum;
Paralleled with POWER input;
Powers processor and provides “internal” power source for modules and Cresnet devices
MEMORY (1) MMC compatible card slot;
Accepts multimedia memory card up to 1 GB
COMPUTER (1) USB Type B female;
USB 1.1 computer console port (cable included)
LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
Reset Buttons
HW-R Hardware reset (reboots the control system)
SW-R Software reset (restarts the SIMPL program)
LED Indicators
NET A – B (yellow x2) Indicate Cresnet communications on each respective segment
POWER A - B (green x2) Indicate 24 Volts DC power present at each respective segment
PWR (green) Indicates power supplied to unit via 24VDC or POWER input
NET (yellow) Indicates Cresnet bus activity
MSG (red) Indicates control system has generated an error message
Power Requirements
5 Watts (0.21 Amps) @ 24 Volts DC;
(Power supply sold separately)
Available Cresnet Power 45 Watts using PW-2420RU or larger (sold separately)
Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Enclosure
Black and gray metal, surface mount box with (2) integral mounting flanges;
Occupies 1 module space in a single-width CAEN or CAENIB enclosure, or 1 left side module space in a double-width enclosure
Dimensions
Height 7.72 in (19.59 cm)
Width 7.05 in (17.89 cm)
Depth 1.71 in (4.33 cm)
Weight
2.14 lbs (0.97 kg)

C2N-UNI8IO Lighting Control
Models Included: C2N-SDC, C2N-UNI8IO, CHV-THSTAT, CLS-C6, GLS-ODT-C-500, PAC2M, TPS-4L

C2N-UNI8IO with a typical lighting automation control system.

Application Diagram (PDF - 1.31 M)
Rev. Date: 1/7/2011

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF - 722 K)
Doc. No. 4839
Rev. Date: 12/1/2007

Manual

Manual (PDF - 2.2 M)
Doc. No. 6507A
Rev. Date: 4/1/2007

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 837 K)
Rev. Date: 10/5/2006

Revit Files

Revit (ZIP - 731 K)
Rev. Date: 8/29/2011

Available Models

Model Description

PAC2M

Professional Automation Mini Control System for CAEN Automation System Enclosures

 

 

 

 

Available Accessories

Model Description

CAEN-2X1

Automation Enclosure, 2 modules high x 1 module wide

 

 

 

CAEN-4X1

Automation Enclosure, 4 modules high x 1 module wide

 

 

 

CAEN-4X2

Automation Enclosure, 4 modules high x 2 modules wide

 

 

 

CAEN-7X1

Automation Enclosure, 7 modules high x 1 module wide

 

 

 

CAEN-7X2

Automation Enclosure, 7 modules high x 2 modules wide

 

 

 

CAENIB-2X1

Automation Enclosure, 2 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X1

Automation Enclosure, 4 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X2

Automation Enclosure, 4 modules high x 2 modules wide - International Version

 

 

 

CAENIB-7X1

Automation Enclosure, 7 modules high x 1 module wide - International Version

 

 

 

CAENIB-7X2

Automation Enclosure, 7 modules high x 2 modules wide - International Version

 

 

 

CLX-PWS75

Cresnet Power Supply Module, 75 Watts, for CAEN Automation Enclosures

 

 

 

PW-2420RU

Power Pack, Desktop, 24VDC, 2A (50 Watts), Regulated, US/International

 

 

 

Invitation to Tender

PAC2M (TXT - 765 B)
Letzte Änderung 11.11.2012