facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

DIN-4DIMFLV4

4-Kanal-Dimmer Steuermodul

4-Kanal-Dimmer Steuermodul 230V. 4-Kanäle 1-10 Volt-Stromsenke für Leuchtstofflampen. 1150W pro Kanal Schaltleistung, 4600W pro Modul. Pro Kanal bis zu 50 dimmbare EVGs (1-10 V.) 60mA. Cresnet Anschluss, frontseitige Handbedienung und Anzeige der Cresnet ID, Override Eingang. Format 9 TE.

The DIN-4DIMFLV4 is a 4-channel lighting control module. A single model supports both 120 and 220-240 Volt applications. Each channel handles up to 30 dimmable ballasts, and may also be used for switching of non-dimmable lighting loads up to 5 amps*, as well as 1/2 HP motors.

Override Input
An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel, or remotely via software.

DIN Rail Installation
The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.

Cresnet®
The DIN-4DIMFLV4 communicates with a DIN-AP2 2-Series Automation Processor, or other Crestron 2-Series control system, via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-4DIMFLV4 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.

Key Features

 

  • 4 channels of 4-wire 0-10 Volt fluorescent dimming
  • Supports 120 to 240 Volt 50/60 Hz
  • Also allows switching of lighting and exhaust fans*
  • Override input
  • Cresnet communications
  • Setup via front panel or software
  • Programmable functionality via DIN-AP2
  • 9M wide DIN rail mounting

Load Ratings
  Dimmer Channels 4
  Maximum Per Channel 5 Amps @ 120 to 240 Volts AC, 50/60 Hz;
600 Watts @ 120 Volts AC;
1150 Watts @ 230 Volts AC;
1200 Watts @ 240 Volts AC, 0.5 HP;
16 Amps Resistive
  Module Total 20 Amps @ 120 to 240 Volts AC, 50/60 Hz;
2400 Watts @ 120 Volts AC;
4600 Watts @ 230 Volts AC;
4800 Watts @ 240 Volts AC
  Dim Load Types 4-Wire 0-10V Fluorescent Dimming Ballasts (30 maximum)
  Switch Load Types* Incandescent, Magnetic Low-voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent, Motors
Connections
  OUTPUT 1 – 4 (2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs;
Voltage Control Range: 0 to 10 Volts DC;
Maximum Sink Current: 60mA per channel;
Output Resolution: 1024 levels (10 bit)
  1 – 4 (4) sets of (2) captive screw terminals;
Isolated Class 1 SPST relay switch circuits 1 – 4;
Relay Rating: 5 Amps maximum per channel;
Maximum Wire Size: 12 AWG (2.5 mm²)
  NET (2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet slave port
  OVERRIDE (2) 2-pin 3.5mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10mA (per module) at 24 Volts
Controls & Indicators
  1 – 4 (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel
  NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; digits also display output levels
  SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
  OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
  PWR (1) Green LED, illuminates when DC power is applied to the NET port
  NET (1) Yellow LED, indicates communication with the control processor
  RESET (1) Recessed miniature pushbutton, resets internal processor
Enclosure
  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
Power Requirements
  Cresnet Power Usage 4.2 Watts (0.18 Amps) @ 24 Volts DC
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 17 BTU/hr
Dimensions
  Height 3.71 in (9.42 cm)
  Width 6.26 in (15.90 cm)
  Depth 2.35 in (5.95 cm)
Weight
  9.2 oz (260 g)

* May not be compatible with some high inrush current loads.

Typical DIN-4DIMFLV4 Applicaiton
Models Included: DIN-4DIMFLV4

Shows typical connections to and from a DIN-4DIMFLV4.

Application Diagram (PDF - 646 K)
Rev. Date: 7/8/2008

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF)

Installation and Operations Guide

Installation And Operations Guide (PDF - 6.25 M)
Doc. No. 6669B
Rev. Date: 1/13/2011

Engineering Specs

Engineering Specs (PDF - 293 K)
Rev. Date: 10/31/2008
Note: This document covers the DIN Rail lighting control products series.

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 612 K)
Rev. Date: 10/17/2012

Available Models

Model Description      

DIN-4DIMFLV4

DIN Rail 0-10V Fluorescent Dimmer, 4 feeds, 4 channels

 

 

 

Invitation to Tender

DIN-4DIMFLV4 (TXT - 1.49 KB)
Letzte Änderung 11.11.2012