facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CEN-RFGW-EX-PWE

Funkempfänger bidirektional – infiNET EX® mit Stromversorgung

Wie CEN-RFGW-EX, jedoch inkl. Power-Einspeisemodul / Netzteil PWE-4803RU zur PoE (Power over Ethernet) Stromversorgung.

The CEN-RFGW-EX is a 2-way RF gateway/transceiver designed to enable communications and management for a complete infiNET EX® wireless network of dimmers, keypads, remotes, shades, thermostats, door locks, and other devices. The CEN-RFGW-EX links the infiNET EX network to a Crestron® control system via high-speed Ethernet. "Wi-Fi® friendly" RF technology permits selection from 16 ISM channels within the 2.4 GHz spectrum to minimize the possibility of interference with other RF equipment including 802.11 devices. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.

infiNET EX®
Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, nearly every infiNET EX device on the network functions as an expander, passing command signals through to every other device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption. Each infiNET EX device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.[1]

Easy Setup
Setting up a complete infiNET EX network is simple, utilizing dynamic discovery to locate and acquire each RF device automatically. At all times, the CEN-RFGW-EX monitors each device on the network, ignoring any other 2.4 GHz signals, and reconfiguring the entire network automatically in response to new sources of interference and other changes in RF conditions.

Up to 100 infiNET EX devices can be linked to a control system via a single CEN-RFGW-EX gateway.[2] Additional gateways may be installed to support more devices, with up to 16 gateways possible in a complete system (RF conditions allowing). Wireless expanders (model CLW-EXPEX or GLA-EXPEX[3]) may be added wherever needed to extend the network by filling in gaps between devices.[4]

Handheld Remote Gateway
The CEN-RFGW-EX also provides a wireless gateway for Crestron MLX-3 and MTX-3 Handheld Remotes[3]. Up to 6 remotes can be associated with a single gateway.[2] Each wireless connection is monitored continuously, diligently keeping track when any remote goes to sleep or wanders out of range, restoring communications seamlessly when it reappears on the network.

Single-Wire Hookup
The CEN-RFGW-EX gateway communicates with a control system over Ethernet and gets its operating power over the same Ethernet connection using PoE technology. PoE (Power over Ethernet) simply requires the presence of an 802.3af or 802.3at PoE power source. Crestron offers the PWE-4803RU PoE Injector, which connects inline with the Ethernet cable, allowing for installation at any convenient location between the gateway and the network switch. The PWE-4803RU is capable of powering a single gateway, and is available separately or packaged with the gateway as model CEN-RFGW-EX-PWE.

Crestron also offers Ethernet switches with built-in PoE (models CEN-SW-POE-5, CEN-SWPOE-16, and CEN-SWPOE-24[3]), affording a complete high-performance networking solution capable of providing PoE for multiple gateways and other PoE devices. Using an Ethernet switch with built-in PoE eliminates the need for individual PoE Injectors.

EMerge Alliance RegisteredEMerge Alliance® Registered
This device is EMerge Alliance registered and designed to work within a 24VDC room-level power distribution system. The EMerge Alliance is a not-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of EMerge Alliance standards[5]. Crestron is a proud member and supporter of the Alliance. For more information about Crestron Solutions for EMerge Alliance Applications visit: www.crestron.com/emerge.

Key Features

 

  • infiNET EX® wireless gateway
  • Ultra dependable mesh network technology
  • Dynamic discovery for fast, easy setup
  • "Wi-Fi® friendly" channel selection for trouble-free operation
  • Dynamic Frequency Allocation prevents RF interference
  • Built-in RF network diagnostics
  • Up to 150 feet (46 m) range indoors, 250 feet (76 m) outdoors[1]
  • Supports up to 100 infiNET EX devices and 5 expanders[2]
  • Supports up to six MLX-3 and MTX-3 handheld remotes[2]
  • High-speed Ethernet control system interface
  • PoE network powered
  • EMerge Alliance® compatible

Notes:

  1. Battery-powered infiNET EX devices do not provide expander functionality, and may have reduced RF range capabilities. Consult the specifications for each network device to confirm its actual wireless capabilities.
  2. A single infiNET EX gateway supports up to 100 wireless network devices inclusive of up to 6 MLX-3 and/or MTX-3 remotes.
  3. Item(s) sold separately.
  4. Up to 5 CLW-EXPEX or GLA-EXPEX infiNET EX Expanders may be added to the network for extended range.
  5. Information regarding the EMerge Alliance can be found at www.emergealliance.org

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. EMerge Alliance and the Emerge Alliance logo are either trademarks or registered trademarks of EMerge Alliance Corporation in the United States and/or other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

Wireless
  RF Transceiver infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
  Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities[1]
  Maximum 100 devices and 5 expanders per gateway[2,4]
Ethernet
  10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant
Controls & Indicators
  PWR (1) Green LED, indicates operating power supplied via PoE
  ACTIVITY (1) Red LED, indicates wireless communications
  ACQUIRE (1) Recessed pushbutton with red LED, used to set up connections with wireless devices
  SETUP (1) Recessed pushbutton with red LED, used to set up connection with the control system via Ethernet
  LAN PoE (1) Green and (1) Amber LEDs, green indicates link status, amber indicates Ethernet activity
Connectors
  Antenna (1) Connection for supplied antenna
  LAN PoE (1) 8-wire RJ45, female;
10Base-T/100Base-TX Ethernet port;
Power over Ethernet compliant
Power Requirements
  Power over Ethernet IEEE 802.3af (802.3at Type 1) Class 1 PoE Powered Device (3.84W)
Environmental
  Temperature 41° to 104°F (5° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 7 BTU/Hr
Enclosure
  Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
  Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
  (Without antenna)
  Height 6.41 in (163 mm)
  Width 3.91 in (100 mm)
  Depth 1.43 in (37 mm)
Weight
  13.1 oz (373 g)

MTX-3 Wireless Connectivity
Models Included: CEN-RFGW-EX, CLW-DIMEX-E, CLW-DIMSWEX-P, CLW-EXPEX, CLW-LDIMEX, MTX-3

Basic wireless connectivity for MTX-3 in a wireless system.

Application Diagram (PDF - 1.75 M)
Rev. Date: 7/15/2010

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF - 769 K)
Rev. Date: 10/21/2013

Reference Guide

Reference Guide (PDF - 1.24 M)
Doc. No. 6689E
Rev. Date: 5/23/2014
Note: Best Practices for Installation and Setup of Crestron RF Products

Installation and Operations Guide

Installation And Operations Guide (PDF - 2.03 M)
Doc. No. 6706G
Rev. Date: 5/30/2013

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 984 K)
Rev. Date: 9/5/2008

Revit Files

Revit (ZIP - 330 K)
Note: For CEN-RFGW-EX
Rev. Date: 9/12/2011

Revit Files

Revit (ZIP - 331 K)
Note: For CEN-RFGW-EX-PWE
Rev. Date: 9/12/2011

Available Models

Model Description      

CEN-RFGW-EX

infiNET EX® Wireless Gateway

     

CEN-RFGW-EX-PWE

infiNET EX® Wireless Gateway w/PoE Injector

     

 

Included Accessories

Model Description      

PWE-4803RU

PoE Injector
Included Quantity for CEN-RFGW-EX-PWE: 1

     

 

Available Accessories

Model Description      

ANT-EXT-10

10 ft Antenna Extender

     

CLW-EXPEX-GD-W-T

infiNET EX® Wireless Expander, Ground Pin Down, White Textured

     

GLA-EXPEX

Crestron Green Light® Wireless Expander for infiNET EX® Networks

     

PWE-4803RU

PoE Injector

     

CEN-SW-POE-5

5-Port PoE Switch

     

CEN-SWPOE-16

16-Port Managed PoE Switch

     

CEN-SWPOE-24

24-Port Managed PoE Switch
Discontinued

     

Invitation to Tender

CEN-RFGW-EX-PWE (TXT - 815 B)
Letzte Änderung 11.11.2012