facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

C2N-SPWS300

Systemnetzgerät 24V DC / 12,5 A / 300W

Systemnetzgerät mit 8 unabhängigen Cresnet Anschlüssen mit 16 Anschlussklemmen. Überwachung und Monitoring durch intergierten Busanschluss. Mit einem Rackmontagesatz C2N-RMAK kann dieses Gerät in einen 19“-Schrank eingebaut werden.

Crestron control systems can put a friendly face on any complete integrated AV or automation solution. To support the myriad touchpanels, keypads, and other peripherals that make up a control system, the C2N-SPWS300 provides a convenient and compact centralized power and termination solution.

Intelligent Power Distribution
The C2N-SPWS300 is a 300 Watt regulated power supply designed for powering a large network of Cresnet devices. Power is supplied on eight individually managed outputs. Each output is rated for up to 75 Watts, with a total system rating of 300 Watts. Electronic circuit breaker protection is provided on every output, which can be individually monitored and reset from the control system. The voltage level at each output can even be monitored along with ambient temperature and fault status for the complete power supply system.

Sequential Switching
To minimize current inrush upon startup, the C2N-SPWS300 implements sequential switching of its eight outputs. The startup process may be activated automatically when AC power is applied, or when 24 Volts DC is sensed coming from the control system or another power supply.

Cresnet Distribution
Connected to the Master port of any 2-Series Crestron control system, the C2N-SPWS300 provides a total Cresnet distribution solution. Carrying both data and power, the 16 Cresnet ports afford great flexibility for the termination of numerous Cresnet devices, with easy expansion using C2N-HBLOCK termination blocks. It is also ideally designed to enhance the built-in Cresnet distribution capabilities of the PAC2 Professional Automation Control System.

Versatile Mounting Options
The C2N-SPWS300 can be installed in a Crestron CAEN Automation Enclosure using the optional CAEN-MK (sold separately), or rack mounted using the optional C2N-RMAK (sold separately). Alternately, the C2N-SPWS300 may simply be placed on a shelf or mounted to any vertical surface using its built-in mounting flanges.

Key Features

 

  • 300 Watt regulated power supply
  • 8 independently managed outputs
  • 16 Cresnet distribution ports
  • Cresnet monitoring and control
  • Expands the Cresnet power and distribution capabilities of any 2-Series control system

Load Ratings
  Per Channel 75 Watts (3.125 Amps) @ 24 Volts DC regulated
  System Total 300 Watts (12.5 Amps) @ 24 Volts DC regulated
  Ripple / Noise  
  Load Protection Electronic circuit breaker per channel, each rated at 75 watts nominal / 100 watts maximum; 4 Amp, 125V internal fuse; all channels shut off in case of total system overload
  Sequential Startup Outputs activate sequentially when power supply system is enabled (see PWR ON, PWR OFF/SLAVE control)
Power Requirements
  4 Amps, 100-240 Volts AC, 50/60 Hz
Connections
  1 – 8 (16) 4-pin 5mm detachable terminal blocks comprising (2) paralleled Cresnet ports per each of (8) output channels;
24 Volt DC power outputs with Cresnet data pass-thru from NET port
  NET (1) 4-pin 5mm detachable terminal block;
Ordinarily connects to the Master Cresnet port of a control system;
Cresnet data ‘Y’ and ‘Z’ terminals pass through to ports 1 – 8;
Applying 24 Volts DC to the ‘24’ and ‘G’ terminals enables the power supply system when in “SLAVE” mode
  AC Line (1) attached input power cable (~1 ft long) with inline IEC320 socket;
Connects to grounded AC power source using 3-prong power cable or pigtail cable, both provided
Controls
  PWR ON, PWR OFF/SLAVE (1) rocker switch; enables/disables the power supply system if no external DC voltage is applied to the NET port, or selects “SLAVE” mode to allow enabling the power supply system remotely by applying an external 24V DC signal to the NET port
  RESET 1 – 8 (8) miniature pushbuttons; each resets its respective output channel, or momentarily disables the channel while held
  SYSTEM RESET (1) miniature pushbutton; resets all output channels sequentially, or momentarily disables all channels while held
  SETUP (1) miniature pushbutton; used for touch-settable ID (TSID)
LED Indicators
  PWR 1 – 8 (green) Indicate 24V DC power present at each channel output
  OVRLD 1 – 8 (red) Indicate a load in excess of 75 watts on a given channel, channel output disabled
  SYSTEM OVRLD (red) Indicates a total load in excess of 300 watts on the power supply system, all channels disabled
  PWR (green) Indicates power supply system is enabled
  NET (yellow) Indicates communication with Cresnet system
  SETUP (red) Used for touch-settable ID (TSID)
Environmental
  Temperature 41° to 104°F (5° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Chassis Aluminum, black anodized with polycarbonate label overlay, convection-cooled, vented top and sides
  Mounting Surface mount using (2) integral mounting flanges, or 3U 19-inch rack-mountable (C2N-RMAK rack kit sold separately)
  CAEN Automation Enclosure Occupies 1 module space in a single-width enclosure, or 2 side-by-side module spaces in a double-width enclosure (CAEN-MK mounting kit sold separately)
Dimensions
  Height 5.19 in (13.18 cm)
  Width 13.25 in (33.66 cm)
  Depth 3.29 in (8.36 cm)
Weight
  5.3 lb (2.4 kg)

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 1.0 M)
Doc. No. 8190
Rev. Date: 6/1/2003

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 1.0 M)
Rev. Date: 11/3/2006

Revit Files

Revit (ZIP - 891 K)
Rev. Date: 8/30/2011

Available Models

Model Description      

C2N-SPWS300

Cresnet Power Supply, 300 Watts

 

 

 

 

Available Accessories

Model Description      

C2N-NPA8

Cresnet Network Poll Accelerator

 

 

 

C2N-RMAK

Rack Mount Kit for C2N-NPA8 and C2N-SPWS300, 3U

 

 

 

CAEN-MK

CAEN Automation Enclosure Mounting Kit for C2N-NPA8 and C2N-SPWS300

 

 

 

Invitation to Tender

C2N-SPWS300 (TXT - 314 B)
Letzte Änderung 11.11.2012