facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

DIN-AP2

Steuerungssystem für Verteilereinbau

Komplettes Steuerungssystem zur Hutschienenmontage, 66 MIPS-Prozessor, Anschluss für CresNet Bus, 2 bidirektionale RS-232 Schnittstellen, 4 IR-Schnittstellen, 4 Relaisausgänge, 8 Digital Ein-/Ausgänge oder analoge Eingänge und Ethernetport, Ethernetschnittstelle mit eigenem Webserver, MMC Expansions Card Slot, USB-Anschluss für Programmierung. Implementation in RoomView™ möglich. Format 9 TE. Externes Netzteil erforderlich.

The DIN-AP2 is a 2-Series control processor designed for small to medium-sized lighting and automation applications. DIN rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices.

2-Series Processor
Built upon Crestron's reliable 2-Series control engine, the DIN-AP2 is extensively programmable using Crestron's suite of powerful development software and vast database of drivers and software modules. The DIN-AP2 works seamlessly with Crestron's entire line of lighting dimmers and shade controls, keypads and touchpanels, thermostats, wireless gateways, and expansion modules.

DIN Rail Installation
The DIN-AP2 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure or mounted on a wall panel. Wiring connections are made using detachable screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and connections are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-AP2's front panel stays accessible while all other connections are concealed.

System Integration
The DIN-AP2 provides for the integration of non-Crestron devices and subsystems through a host of control interfaces. Four isolated relays and eight Versiport I/O ports are built in to accommodate all kinds of sensors, contactors, door strikes, and other low-voltage controls. Two bidirectional RS-232 COM ports and four IR/serial ports allow for the integration of everything from simple shade controllers to advanced security systems. Additional interfaces and controllers can be added easily using Crestron's DIN Rail series lighting and automation modules.

Cresnet®
Cresnet is the communications backbone for Crestron lighting modules, wall box dimmers, shade controllers, thermostats, keypads, touchpanels, and many other devices. This flexible 4-wire bus streamlines the wiring of a complete Crestron system. The DIN-AP2 includes a pair of Cresnet master ports (paralleled) capable of supporting approximately 20 typical devices. Larger systems with more than 20 devices can be handled by adding the DIN HUB Cresnet Distribution Hub. Connectivity for multiple homeruns can be facilitated using one or more DIN-BLOCK Cresnet Distribution Blocks. Additionally, at least one DIN-PWS50 Cresnet Power Supply is required to power the DIN-AP2 and any connected Cresnet devices.

Ethernet and e-Control®2
Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. Native features include a built-in email client to report system troubles and other functions to the owner or service company via instant email notification. An onboard Web server provides the foundation for Crestron's exclusive e-Control 2 Xpanel technology, providing secure IP-based remote control.

RoomView® and SNMP—For large facilities utilizing multiple DIN-AP2's and other control systems, Crestron's exclusive RoomView Help Desk software delivers a comprehensive solution for remote monitoring and asset management. Also, built-in SNMP support enables similar capability using third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.

Memory Expansion
A memory card slot allows for easy expansion of the DIN-AP2's internal memory using an MMC-compatible memory card up to 2 GB.

D3 Pro™ Software
Crestron D3 Pro software eliminates the need for custom programming, providing a complete design, development, and documentation solution for the lighting professional.

EMerge Alliance RegisteredEmerge Alliance Registered
This device is EMerge Alliance® registered and designed to work within a 24VDC room-level power distribution system. The EMerge Alliance is a non-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of Emerge Alliance standards[1]. Crestron is a proud member and supporter of the Alliance. For more information about Crestron Solutions for EMerge Alliance Applications visit: www.crestron.com/emerge.

Key Features

 

  • 2-Series control engine
  • MMC memory expansion card slot
  • Cresnet port - master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2, SNMP, & RoomView support
  • 2 bidirectional RS-232 COM ports
  • 4 IR/serial ports
  • 8 Versiport I/O ports
  • 4 Low-voltage relay ports
  • Configurable via Crestron D3 Pro software
  • 9M wide DIN rail mounting
  • Requires external power supply
  • EMerge Alliance® Compatible

Notes:

  1. Information regarding the EMerge Alliance can be found at www.emergealliance.org.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

Crestron, the Crestron logo, Cresnet, Roomview, D3Pro, SIMPL+ and Crestron e-Control are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

Processor
  CPU 32-bit Freescale ColdFire® Microprocessor
Memory
  SDRAM 32 MB
  NVRAM 256 KB
  Flash 8 MB
  Memory Card expandable up to 2 GB using MMC compatible card (not included)
Operating System
  Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®
Ethernet
  10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
  I/O 1 – 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.25 Volts DC;
Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
  RELAYS 1 – 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  COMPUTER (1) USB Type B female, USB 1.1 computer console port
  NET (2) 4-pin 3.5mm detachable terminal blocks, paralleled;
Cresnet port and 24 Volt DC power input
Master/Slave selectable
  COM 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks
Bidirectional RS-232 ports;
Up to 115.2k baud; hardware and software handshaking support
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  IR/SERIAL 1 – 4 (1) 8-pin 3.5mm detachable terminal block comprising (4) IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
  MEMORY (1) MMC compatible card slot;
Accepts Multimedia Memory Card (MMC) up to 2 GB
Reset Buttons
  HW-R (1) Recessed miniature pushbutton for hardware reset (reboots the processor)
  SW-R (1) Recessed miniature pushbutton for software reset (restarts the SIMPL program)
LED Indicators
  POWER (1 green) Indicates power supplied to unit via either NET port
  NET (1 yellow) Indicates Cresnet bus activity
  MSG (1 red) Indicates processor has generated an error message
Power Requirements
  Cresnet Power Usage 8 Watts (0.33 Amps @ 24 Volts DC)
Environmental
  Temperature 32° to 104 °F (0° to 40 °C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 26 BTU/Hr
Enclosure
  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 9 DIN module spaces (162mm)
Dimensions
  Height 3.71 in (9.42 cm)
  Width 6.26 in (15.90 cm)
  Depth 2.28 in (5.80 cm)
Weight
  9.8 oz (277 g)

C2N-UNI8IO with DIN-Rail
Models Included: C2N-SDC-DC, C2N-UNI8IO, CHV-THSTAT, DIN-1DIMU4, DIN-AP2, DIN-BLOCK, GLS-ODT-C-500, TPS-4L

C2N-UNI8IO with typical DIN-rail lighting automation system.

Application Diagram (PDF - 1.05 M)
Rev. Date: 3/31/2010

Application Diagram

Typical DIN-AP2 Application
Models Included: DIN-AP2

Shows typical connections to and from a DIN-AP2.

Application Diagram (PDF - 684 K)
Rev. Date: 7/8/2008

Application Diagram

DIN Rail Automation System
Models Included: DIN-1DIMU4, DIN-AO8, DIN-AP2, DIN-HUB, DIN-PWS50

DIN Rail processor with lighting, HVAC, security and AV integration.

Application Diagram (PDF - 2.76 M)
Rev. Date: 10/22/2008

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF - 929 K)
Rev. Date: 12/28/2011

Design Guide

Design Guide (PDF - 5.34 M)
Doc. No. 4775B
Rev. Date: 7/15/2013
Note: Crestron Green Light Commercial Lighting Design Guide. This design guide provides information on lighting system design using the wide range of products found in the Crestron Green Light family.

Design Guide

Design Guide (PDF - 7.45 M)
Doc. No. 7386D
Rev. Date: 11/22/2013
Note: DALI Lighting Design Guide. This design guide provides detailed information on the Digital Addressable Lighting Interface (DALI) systems.

Installation and Operations Guide

Installation And Operations Guide (PDF - 1.46 M)
Doc. No. 6662C
Rev. Date: 10/3/2011

Engineering Specs

Engineering Specs (PDF - 293 K)
Rev. Date: 10/31/2008
Note: This document covers the DIN Rail lighting control products series.

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 1.0 M)
Rev. Date: 4/21/2008

Revit Files

Revit (ZIP - 783 K)
Rev. Date: 8/29/2011

Available Models

Model Description      

DIN-AP2

DIN Rail 2-Series Automation Processor

 

 

 

 

Available Accessories

Model Description      

DIN-1DIMU4

DIN Rail Universal Dimmer, 1 feed, 4 channels

 

 

 

DIN-2MC2

DIN Rail Motor Control, 2 feeds, 2 channels

 

 

 

DIN-4DIMFLV4

DIN Rail 0-10V Fluorescent Dimmer, 4 feeds, 4 channels

 

 

 

DIN-8SW8

DIN Rail High-Voltage Switch, 8 feeds, 8 channels

 

 

 

DIN-AO8

DIN Rail Analog Output Module

 

 

 

DIN-BLOCK

DIN Rail Cresnet Distribution Block

 

 

 

DIN-HUB

DIN Rail Cresnet Distribution Hub

 

 

 

DIN-IO8

DIN Rail Versiport Module

 

 

 

DIN-PWS50

DIN Rail 50 Watt Cresnet Power Supply

 

 

 

Invitation to Tender

DIN-AP2 (TXT - 1.92 KB)
Letzte Änderung 04.08.2014