Crestron® DM® Switchers provide the foundation for a complete DigitalMedia™ system, delivering an advanced, true high-definition multi-room AV signal routing solution that's extremely flexible and installer-friendly. The DM-MD32X32 affords low-latency switching and pure, lossless distribution of HDMI® and other signals to support the latest Blu-ray Disc® players, HDTV receivers, digital media servers, computers, and all your other AV devices. Integrated Ethernet networking and USB HID distribution provide a complete connectivity solution. And naturally, Crestron control is built in for managing the displays and other room devices without necessitating any additional wiring.
The DM-MD32X32 is field-configurable to handle up to 32 AV sources of virtually any type. The outputs are also field-configurable to provide up to 32 DM room outputs and/or HDMI outputs in a single chassis, with expansion capability possible for up to 160 outputs using multiple chassis. A full selection of DM switcher input cards, DM transmitters, and DM room controllers provides extensive connectivity throughout a residence or commercial facility, supporting a complete range of analog and digital signal types — all through one switcher!
DigitalMedia thoughtfully manages all of your disparate AV signals and devices to ensure an optimum video image and audio signal at every location. User-friendly setup and troubleshooting tools are provided through the DM-MD32X32 front panel, or via Crestron Toolbox™ software, to make setting up a complete multi-room HD system easy.
To configure a DM switcher complete with input and output cards, cables, and other peripherals, please use the DigitalMedia™ Switcher Configuration Tool.
You can't talk about AV and home entertainment today without talking about high-definition, and creating a professional HD AV distribution system means handling the challenges that come with HDMI. HDMI is the standard for interfacing high-definition AV equipment, but despite its many benefits, wasn't developed with multi-room distribution in mind. So, as the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a room, building, or campus.
DigitalMedia 8G is the latest generation of DM, providing a true one-wire transport for moving high-definition video, audio, and Ethernet over low-cost twisted-pair or fiber optic cable without any compression or repeaters. Engineered for ultra high-bandwidth and ultimate scalability, DM 8G® handles uncompressed video beyond high-definition with support for HDCP, Deep Color, and 3D. Audio capabilities include simultaneous stereo and multichannel surround sound signals, with support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over one 8-conductor twisted-pair wire or one strand of multimode or single-mode fiber. DM 8G enables wire distances up to 330 feet (100 m) via DM 8G+™ (DM 8G over CAT5e)[1,6], 1000 ft (300 m) via DM 8G Fiber (DM 8G over multimode fiber)[2,6], or 7.5 miles (12 km) via DM 8G SM Fiber (DM 8G over single-mode fiber)[3,6].
The DM-MD32X32 provides full support for Crestron DigitalMedia 8G devices as well as all first-generation DM CAT[4,6] and DM Fiber[5,6] products, letting you take advantage of the latest Crestron DM technology without compromising your existing investment.
The DM-MD32X32 features a modular architecture with 32 input card slots, and 8 quad output card slots. Each card slot on the DM-MD32X32 is field-installable, allowing for easy and flexible system configuration with the ability to make changes to the system as needs change.
A wide selection of input cards is offered to support a complete range of digital and analog AV signal types including HDMI, DVI, DisplayPort Multimode, SDI, RGB and analog video, SPDIF and analog audio, and DigitalMedia.
Up to 8 output cards may be installed to feed up to 32 DM Receivers/Room Controllers using your choice of DM 8G+, DM 8G Fiber, DM CAT, or DM Fiber. Output cards may also be used to feed additional switchers in other rooms or buildings using any form of DM including long-distance DM 8G SM Fiber. HDMI outputs are available as well for direct connection to centralized audio processors and video monitors.
An HDMI "pass-thru" output is provided on every input card to allow the inputs of up to 5 DM switchers to be daisy-chained, enabling the configuration of very large distribution systems with many DM and HDMI outputs. Using five DM-MD32X32 switchers, it is possible to support an incredible 160 separate outputs.
Besides handling every available HD video format supported by HDMI, DigitalMedia also supports the distribution of DVI, DisplayPort Multimode, and RGB computer sources, and is fully compatible with DVI computer monitors up to 1920 x 1200 WUXGA.
EDID Format Management
With all of today's varied AV sources comes a multitude of confusing video and audio formats to keep track of, and chances are not every device in your system supports all of the same formats. Such conflicts can wreak havoc any time you route one source to more than one display or audio component. For instance, the Blu-ray player that's feeding your 1080p projector in the theater may restrict itself to a lower resolution, or even shut off completely, if someone decides to view the same signal on the 20" TV in the kitchen. And, instead of enjoying your theater's incredible 7.1 surround sound, you may find yourself limited to 5.1 or even plain old stereo.
DigitalMedia eliminates such conflicts by managing the EDID (Extended Display Identification Data) that many devices use to communicate their capabilities. Via Crestron Toolbox software, the format and resolution capabilities of each device can be assessed, allowing the installer to configure EDID signals appropriately for the most desirable and predictable behavior.
A Scaler for Every Display
Scaling capability can be added to any DM system using select DM receivers with built in high-definition scalers. Through a distributed scaler approach, DigitalMedia delivers an incredibly flexible and user-friendly solution for routing multiple disparate sources to many different display devices. By placing an independent high-performance scaler at every display device, DM ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the building. It also allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater's full HD 1080p 3D image with smaller, lesser displays in the kitchen, bathroom, and bedrooms.
QuickSwitch HD® Technology
Handling high-definition digital media means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme that content providers use to protect their DVDs, Blu-ray discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires a source device to "authenticate" each display and signal processor in the system and issue it a "key" before the content can be viewed. Ordinarily this causes a complete loss of signal for up to 15 seconds each time a new source or display is selected anywhere in the system. To make matters worse, every source device has a limited number of keys available, so connect too many displays and the source will simply stop outputting a signal without warning.
Not to worry — Crestron QuickSwitch HD manages the keys for every HDCP-compliant device in the system, maintaining continuous authentication for each device to ensure fast, reliable routing of any source to any number of display devices.
Versatile Audio Routing
HDMI is the key to handling all the latest 7.1 surround sound formats like Dolby TrueHD and DTS-HD Master Audio. Great for your high-end home theater, but how do you share that same source with other audio zones in the house?
DigitalMedia provides the answer, allowing for the simultaneous distribution of multi-channel surround sound and two-channel stereo signals from the same HDMI source. Using a choice of DSP-based input cards, the DM-MD32X32 employs onboard digital processing to derive a stereo down-mix from the original multi-channel signal. Both signals can be routed separately or simultaneously from any of the switcher's DM outputs, allowing either signal to be selected for output at each DM receiver location.
Back at the switcher, the digital stereo signal is also converted to analog to enable sharing with every other room in the house via a Sonnex™, Adagio®, or other multi-room audio distribution system. The DM-MD32X32 also allows bulky surround sound processors and amplifiers to be located centrally instead of at the display location via optional local HDMI outputs.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also extend 10/100 Ethernet out to each display and source device via DM room controllers and select DM transmitters, providing high-speed connectivity for any room device that requires a LAN connection. Ethernet is also utilized internally by the Crestron control bus to manage all of the DM devices in the system and provide display control in each room. Through its Gigabit Ethernet port, the DM-MD32X32 provides a single-point connection to a corporate LAN or home network, requiring just one IP address for the complete DM system.
USB HID Switch
DigitalMedia lets you centralize ALL of your HD sources - not just television receivers and DVD changers, but also media servers and computers. Built-in USB HID (Human Interface Device) signal routing allows USB HID compatible keyboards and mice to be connected at a remote display location, conference table or presentation lectern, extending their signals through to the centralized equipment via USB HID ports provided on select switcher input cards.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. DigitalMedia provides an alternative to conventional IR and RS-232 device control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-MD32X32 provides a gateway for controlling many devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR probes. Through proper CEC signal management, DigitalMedia allows you to take control of each device as you like.
Via the front panel or using Crestron Toolbox software, every step of the DM-MD32X32's setup process is designed to be quick and easy, configuring inputs and outputs automatically while letting the installer make intelligent design decisions along the way. The switcher even tests and measures the length of each DM cable, automatically making the appropriate calibrations for optimal signal transmission to every room. With DigitalMedia, an entire 32x32 system can be commissioned in as little as 15 minutes.
To configure a DM switcher complete with input and output cards, cables, and other peripherals, please use the DigitalMedia™ Switcher Configuration Tool.
Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.
- Provides lossless HD AV signal routing over twisted-pair wire or fiber
- Integrates video, audio, networking, and control over one wire
- Affords full matrix switching with ultra high 12.5 Gbps backplane data rate
- Handles HDMI® with Deep Color, 3D, and high-bitrate 7.1 encoded audio
- Supports video resolutions up to WUXGA 1920x1200 and HD 1080p60
- Allows up to 330 ft (100 m) wire distance via DM 8G+™[1,6]
- Allows up to 1000 ft (300 m) wire distance via DM 8G® Fiber[2,6]
- Allows up to 7.5 miles (12 km) wire distance via DM 8G Single-Mode Fiber[3,6]
- Also supports all first-generation DM® CAT and DM Fiber products[4,5,6]
- Supports up to 32 DM receivers and room controllers with easy expansion for more outputs
- Modular inputs support a complete range of digital and analog signal types
- QuickSwitch HD® technology manages HDCP keys for reliable, low-latency switching
- Detects and displays detailed video and audio input information
- Performs automatic AV signal format management via EDID
- Allows independent scaling for every display through select DM receivers
- Enables device control via CEC
- Distributes USB HID mouse and keyboard signals
- Allows full audio and USB breakaway switching
- Integrates with analog audio distribution systems
- Enables simultaneous output of stereo and surround sound audio
- Includes integrated Ethernet switch with Gigabit LAN port
- Includes built-in power distribution for DM transmitters, repeaters, and room controllers
- Provides easy setup and diagnostics tools via front panel or software
- Half-million hour rated internal universal power supply
- 14-space 19-inch rack-mountable
|Mark of Excellence Awards
The Consumer Electronics Association's Mark of Excellence Awards recognize the best in home electronics products, services, and installed technology. Presented at EHX 2011, Crestron new generation home technology products won five Mark of Excellence Awards.
Across a broad range of hardware and software categories, the five winning Crestron innovations were:
Human Interface Product of the Year - Crestron Mobile Pro G App for iPad®
Installation Product of the Year - Crestron Sonnex Tools Multiroom Audio Setup
Multiroom Audio/Video Product of the Year - Crestron Sonnex Multiroom Audio System
Software Application of the Year - Crestron Mobile Pro G App for iPad®
Video Product of the Year - Crestron 32x32 DigitalMedia Switcher
|2011 InAVation Awards
The 2011 InAVation Awards recognize outstanding products and projects within the industry.
Crestron proudly accepted first place honors in the following category:
Most InAVative Commercial Control System:
DigitalMedia Switcher DM-MD32x32
Winners were selected by inAVate, the leading online resource for Pro AV technology & integration, and honored at ISE 2011 in Amsterdam.
|2010 CE Pro BEST Awards
CE Pro Magazine's BEST Awards (Best Electronic Systems Technologies) recognize the industry's most noteworthy new products and technologies. Winners were selected based on criteria including creativity, innovation, incorporated equipment, obstacles overcome, aesthetics, and lifestyle benefits.
Five new Crestron products were named CE Pro Best 1st Place winners during CEDIA EXPO 2010:
BEST Whole House Control System:
MC3 3-Series™ Control System
BEST Multi-Zone Amplifier-Receiver:
Sonnex™ Digital 24X8 Multi-Room Audio System
BEST AV Preamp-Processors-Switcher-Receiver:
PROCISE™ High Definition 7.3 Professional Surround Sound Processor
BEST Commercial Networking Product:
32x32 DigitalMedia™ Switcher
BEST Monitoring Device:
Fusion EM™ Energy Management Software
|2010 SCN Installation Product Awards
Crestron Sets Record for Most SCN Installation Product Awards
Crestron products were awarded an unprecedented three SCN Installation Product Awards at InfoComm10 in Las Vegas, setting a new record. SCN Awards recognize excellence in the integration of audio, video, control and networking products in the installation market. The Crestron winners were:
Most Innovative Control Product for Commercial Installation: TPMC-4SM Touchpanel Media Center
Most Innovative Video Distribution or Switching Product: DM-MD32X32 DigitalMedia™ Switcher
Most Innovative Commercial Systems Installation Accessory:
The 4.3" TPMC-4SM is a slim, PoE touchpanel providing complete room control and room scheduling. The DM-MD32X32 DigitalMedia Switcher distributes and manages all analog and uncompressed HD digital signals over a single copper wire and fiber. DM Tools make setup, commissioning, troubleshooting and optimization of DigitalMedia systems fast and reliable.