Produktkategorien
Produkt
>> Startseite > Produkte > CEN-RGBHV16X16
Produktfoto

CEN-RGBHV16X16

16x16 RGBHV Kreuzschiene

wie CEN-RGBHV-12X4, nur mit 16x16 RGBHV- sowie 16x16 Stereo Audio Kreuzschiene. 6 HE

Crestron wideband matrix switchers are designed to provide flexible signal routing of high-res video and audio for the most demanding presentation environments. With extremely low crosstalk, 450MHz video bandwidth, professional balanced audio, and full Crestron control system integration, the CEN-RGBHV16X16 satisfies the demanding video requirements of corporate boardrooms and training centers, university lecture halls, high-tech houses of worship, command and control facilities, and live staging events.

High-Bandwidth Matrix Router
The CEN-RGBHV16X16 is a high-bandwidth matrix switcher capable of routing up to 16 computer or video sources to up to 16 display devices. Its five matrix levels accommodate any combination of analog RGBHV, HD/component, S-Video and composite signals. Proven flat response achieves optimum performance even at the highest bandwidth. Selectable sync impedance on every input helps accommodate varying cable lengths.

Glitch-free Switching
Video-follow-sync switching ensures a glitch-free transition when selecting between non-synchronous sources. Blanking time is independently adjustable per output from 0 to 10 seconds, allowing each display device time to lock to the new sync signal before displaying the video image whenever a new source is selected. A sync reference input is also provided to support vertical interval switching of genlocked sources.

Sync Detection
Video sync detection on each input measures the H and V sync rates of every RGB source and allows their values to be viewed on the front panel display, control system touchpanel, or RoomView® software.

Professional Stereo Audio Matrix
A 16 x 16 stereo audio matrix is also included, supporting both balanced and unbalanced signals. Programmable input level compensation helps ensure compatibility with a wide range of pro and semi-pro sources. Automatic blanking achieves a pop-free transition when switching between sources. Every output includes volume and mute control, providing multiple channels of real-time controllable audio signal distribution to feed multi-zone amplifiers, assistive listening, and recording equipment. Audio breakaway capability allows any audio input or output to be linked with its respective video channel, or switched independently.

Full-featured Front Panel
The CEN-RGBHV16X16 is fully operable out-of-the-box for use as a standalone switcher. Featuring an informative LCD display and quick-adjust knob, the front panel supports essential switcher operation without requiring a computer or control system. Advanced setup is available through Crestron Toolbox™ software. All signal routing and audio compensation settings are stored in non-volatile memory onboard the switcher.

Customizable label strips are provided on the front panel for clear designation of its inputs and outputs using Crestron Engraver software or standard 3/8" tape labels. Names may also be entered through software to appear on the LCD display during operation. For security, the front panel controls can be password protected or locked out.

Crestron System Integration
Via Cresnet or high-speed Ethernet, Crestron switchers offer the ultimate in control system integration with every function accessible through SIMPL or SystemBuilder™ without deciphering cryptic protocols. Up to 10 routing presets can be saved onboard the CEN-RGBHV16X16 for instant recall. Integration with any 2-Series Control System also provides the gateway to Crestron's RoomView® Asset Management Software and e-Control®2 XPanel Solutions for remote monitoring and control.

Key Features

 

  • 16 x 16 high-bandwidth matrix switcher
  • Low crosstalk | Incredibly flat response
  • 450MHz video bandwidth (-3dB)
  • Professional balanced stereo audio
  • Audio input level compensation
  • Audio output volume and mute control
  • Input sync detection | Genlock sync input
  • Adjustable video and audio blanking
  • Selectable input sync impedance
  • Standalone operation | LCD-driven front control panel
  • Cresnet or high-speed Ethernet communications
  • Six-space rack mount installation

Video/RGB
  Switcher 16x16(x5) crosspoint matrix, adjustable blanking, sync detection, selectable input termination, vertical interval switching using genlock input
  Signal Types RGB and composite, S-Video, or component video (does not transcode)
  Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p
  RGB Formats RGBHV, RGBS, RGsB, or YUV
  Gain 0dB (75 ohms terminated)
  Bandwidth 450MHz (-3dB) fully loaded
  Blanking Time Adjustable 0 to 10 seconds, 0.5 second steps
  Crosstalk ≤-65 dB @ 5 MHz, ≤-47 dB @ 100 MHz
Audio
  Switcher 16x16 stereo crosspoint matrix, input compensation, output volume and mute control, adjustable blanking, audio breakaway
  Input Compensation ±10dB in 0.5dB steps
  Output Volume Control -60dB to +20dB in 0.5dB steps
  Blanking Time Adjustable 0 to 10 seconds, 0.5 second steps
  Frequency Response 20Hz to 20kHz ±0.5dB
Ethernet
  10/100BaseT, static IP or DHCP/DNS, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP
Connectors - Audio
  INPUTS 1 - 16 (16) 5-pin 3.5mm detachable terminal blocks;
Balanced/unbalanced stereo line-level inputs;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
Input Impedance: 20k ohms balanced, 10k ohm unbalanced
  OUTPUTS 1 - 16 (16) 5-pin 3.5mm detachable terminal blocks;
Balanced/unbalanced stereo line-level outputs;
Maximum Output Level: 12 Vrms balanced, 6 Vrms unbalanced;
Output Impedance: 100 ohms balanced, 50 ohms unbalanced
Connectors - Video/RGB
  VID REF IN (2) BNC female;
Genlock sync reference input and loop-thru, unterminated
  INPUTS 1 - 16 (16) sets of (5) BNC female, each set comprising (3) high-bandwidth video inputs plus (2) sync inputs;
Input Level: 0.2 to 5.0 Vp-p;
RGB Input Impedance: 75 ohms nominal;
Sync Input Impedance: 75 or 510 ohms, independently selectable for H and V per input;
Return Loss: < -30dB @ 5MHz;
Sync detection on every input connector
  OUTPUTS 1 - 16 (16) sets of (5) BNC female, each set comprising (3) high-bandwidth video outputs plus (2) sync outputs;
Output Level: 0.2 to 5.0 Vp-p;
Output Impedance: 75 ohms nominal;
Return Loss: < -30dB @ 5MHz
Connectors - Control & Power
  NET (1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network;
Does not draw power from the network
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  100-240V~2.0A 50/60Hz (1) IEC Socket, main power input;
Mates with removable power cord, included
  FUSE Dual fuse holder, main fuse;
Hot: 5mm x 20mm, 250V, 2.5A, time-lag;
Neutral: 5mm x 20mm, 250V, 10A, time-lag
  G (1) 6-32 screw, chassis ground lug
  COMPUTER (front) (1) USB Type B female;
USB 1.1 computer console port (6 ft cable included)
LCD Display
  Green LCD alphanumeric, adjustable backlight;
2 lines x 20 characters per line;
Displays inputs/outputs by name, scan rates, audio levels, IP configuration and setup menus
Controls and Indicators
  SOFTKEYS (4) pushbuttons for activation of LCD driven functions and passcode entry
  HW-R (1) recessed miniature pushbutton for hardware reset, reboots the switcher
  CLEAR (1) pushbutton and red LED, clears all matrix routing
  VIEW (1) pushbutton and red LED, toggles VIEW mode on/off
  TAKE (1) pushbutton and red LED, executes routing
  MENU (1) pushbutton, steps menu back one level
  ENTER (1) pushbutton, executes highlighted menu or value
  A (1) pushbutton & red LED, selects audio routing view
  V (1) pushbutton & red LED, selects video routing view
  SYNC (1) pushbutton & red LED, displays input sync rates
  Quick-Adjust Knob (1) continuous turn rotary encoder, adjusts menu parameters
  IN 1 – 16 (16) pushbuttons and red LEDs, select input to be routed
  OUT 1 – 16 (16) pushbuttons and red LEDs, select output destination
  INPUT TERMINATORS (rear) (32) DIP switches, select input termination for each input, independently for H and V Sync
Power Requirements
  Main Power 2 Amps @ 100-240 Volts AC, 50/60 Hz
  Cresnet Power Usage none
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation Unloaded: 100 Watts or 345 BTU/Hr;
Loaded: 120 Watts or 410 BTU/Hr
Enclosure
  Chassis Steel, black matte powder coat finish, vented sides, fan-cooled
  Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
  Mounting Freestanding or 6U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
  Height 10.47 in (26.60 cm) without feet
  Width 17.28 in (43.90 cm);
19.0 in (48.26 cm) with ears
  Depth 19.35 in (49.15 cm)
Weight
  40 lb (18.14 kg)

Available Models

Model Description      

CEN-RGBHV16X16

16x16 Wideband RGB Matrix Switcher