| Processor |
| |
CPU |
32-bit Freescale ColdFire® Microprocessor |
| Memory |
| |
Flash |
16 MB |
| |
SDRAM |
32 MB |
| |
NVRAM |
256 kB |
| Operating System |
| |
Real-time, preemptive, multitasking kernel, multi-threaded, FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® |
| Ethernet |
| |
10/100BaseT, static IP or DHCP/DNS, SSL, autonegotiating, full duplex TCP/IP, UDP/IP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control 2 XPanel and RoomView applications |
| Video |
| |
Switchers |
3x1 HDMI switcher, 8x2 component matrix, 4x2 S-Video matrix, 4x2 composite matrix |
| |
Signal Types |
HDMI, component (YPbPr), S-Video (Y/C), and composite video (does not transcode) |
| |
Formats |
NTSC or PAL, HDTV up to 1080i/1080p |
| |
Gain |
0dB (75 ohms terminated) |
| |
Bandwidth |
400MHz |
| |
Crosstalk |
>54dB |
| |
S/N |
>70dB |
| Audio – Surround Sound Processor |
| |
Processor |
Texas Instruments DA610 Aureus™ 32-bit floating point DSP w/Audyssey MultEQ®XT setup algorithms |
| |
Analog-To-Digital Conversion |
24-bit 48 kHz |
| |
Digital-To-Analog Conversion |
24-bit 48 kHz |
| |
Supported Formats/Modes |
Bypass, Stereo, 2-channel steering (surround or rear), Multi-channel stereo, Ambience Effects (Cathedral, Hall, Stadium, Jazz Club), Dolby® Pro Logic IIx, Dolby Digital 5.1, Dolby Digital EX, DTS Neo:6, DTS Digital 5.1 Discrete, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS 96/24 |
| |
Surround Sound Master Volume |
-80dB to +20dB, 0.5dB steps |
| |
Speaker Compensation |
±12dB, 0.5dB steps |
| |
Low Frequency Effects (LFE) |
-10dB to +0dB, 0.5dB steps |
| |
Mode Trim (Level Preset) |
±12dB, 0.5dB steps (master); ±12dB, 0.5dB steps (per output); -10dB to +0dB, 0.5dB steps (LFE) |
| |
Input Compensation |
±10dB, 1 dB steps |
| |
Mute |
-80dB (electronic), >-100dB (relay) |
| |
Bass Gain Range |
±12dB, 1 dB steps |
| |
Treble Gain Range |
±12dB, 1 dB steps |
| |
EQ Modes |
Audyssey MultEQ XT or 6-band parametric or graphic per surround/subwoofer output channel |
| |
PEQ Filter Gain |
±12dB, 0.5dB steps |
| |
PEQ Filter Bandwidth |
0.02 to 2.0 octaves |
| |
PEQ Filter Center Frequency |
20Hz to 20kHz |
| |
GEQ Filter Gain |
±10dB, 0.5dB steps |
| |
GEQ Filter Center Frequencies |
50, 180, 630, 2.3k, 8k Hz |
| |
Crossover/High-Pass Frequency |
40 to 200 Hz, 10Hz steps |
| |
Maximum Delay |
100mS per channel, picture delay (lip-sync) and speaker distance compensation combined |
| |
Dynamic Range (compression) |
Minimum, Standard, Maximum |
| |
Frequency Response |
20Hz to 20kHz ±0.01dB (preamp); 20Hz to 20kHz ±0.2dB (power amp) |
| |
THD+N |
<0.006% (preamp), 0.03% (power amp), 20Hz to 20kHz |
| |
S/N Ratio |
>100dB (preamp), 100dB (power amp), 20Hz to 20kHz A-weighted |
| |
Dynamic Range |
>113dB |
| |
Channel Separation |
>90dB (preamp), >80dB (power amp) |
| Audio – Multiroom Distribution |
| |
Typical of up to 5 Stereo, or 4 Stereo + 2 Mono Room Outputs: |
| |
Controls |
Volume, Balance, Bass, Treble, Loudness, Mute, Mono, Input Compensation |
| |
Volume Gain Range |
-80dB to +20dB, 1 dB steps |
| |
Mute |
-100dB (electronic), -120dB (relay/room off) |
| |
Input Compensation |
±10dB, 1 dB steps |
| |
Bass Gain Range |
±12dB, 2 dB steps |
| |
Treble Gain Range |
±12dB, 2 dB steps |
| |
Frequency Response |
20Hz to 20kHz ±0.4dB |
| |
S/N Ratio |
>100dB, 20Hz to 20kHz A-weighted |
| |
THD+N |
<0.08%, 20Hz to 20kHz |
| |
Stereo Separation |
>75dB |
| Connectors - Control |
| |
NET 1 – 6 |
(6) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, provide data and power for keypads and other Cresnet devices |
| |
IR OUT 1 – 8 |
(8) 3.5mm TRS mini-phone jacks, IR/Serial ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5V) up to 9600 baud |
| |
IR IN |
(1) 3.5 mm TRS mini-phone jack; For connection of the CNXRMIRD IR receiver (sold separately); Allows IR wireless control from Crestron and third-party remotes using RC-5 IR commands |
| |
INPUT 1 – 4 |
(1) 5-pin 3.5mm detachable terminal block; Comprises (4) digital inputs; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal |
| |
RELAY OUTPUT 1 – 4 |
(1) 8-pin 3.5mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
| |
COM A – B |
(2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support |
| |
COMPUTER |
(1) 6-pin RJ11 female, bidirectional RS-232 computer console port |
| |
LAN |
(1) 8-wire RJ45 with 2 LED indicators, 10/100BaseT Ethernet port; Green LED indicates link status, Yellow LED indicates Ethernet activity |
| |
NET |
(2) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, paralleled with NET ports 1 through 6; Normally connect to AAE(s) |
| |
USB (front) |
(1) USB Type B female (behind label strip); USB 1.1 computer console port (cable included) |
| Connectors - Audio |
| |
SLOT 1 – 3 |
(3) Adagio tuner card slots; accept choice of dual tuner cards; Outputs from the tuner cards parallel to ANALOG SOURCES 1 – 6 |
| |
MULTI-CHANNEL SOURCE |
(8) RCA female; Unbalanced line-level 7.1 Surround Sound audio inputs; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| |
ANALOG SOURCES 1 – 10 |
(20) RCA female comprising (10) unbalanced stereo line-level audio inputs; Inputs 1 through 6 parallel with outputs from tuner card slots; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| |
DIGITAL SOURCES 1 – 6 |
(6) RCA female; S/PDIF coaxial digital audio inputs; Input Impedance: 75 ohms |
| |
DIGITAL SOURCES 7 – 10 |
(4) JIS F05 female (TOSLINK) optical fiber connectors; S/PDIF optical digital audio inputs |
| |
OUTPUT |
(2) RCA female; Unbalanced stereo line-level audio output containing a stereo mix of all internal surround sound processor outputs; Maximum Output Level: 2.5 Vrms; Output Impedance: 50 ohms |
| |
PRE-AMP OUTPUT |
(8) RCA female; Unbalanced line-level 7.1 surround sound audio outputs; Maximum Output Level: 2.5 Vrms (front, surround, back, center); 6.3 Vrms (sub); Output Impedance: 50 ohms |
| |
SUB (balanced) |
(1) 3-pin 3.5mm detachable terminal block; Balanced line-level subwoofer audio output; Maximum Output Level: 12.6 Vrms; Output Impedance: 100 ohms |
| |
ROOM 1 – 4 |
(8) 2-pin 7.62mm detachable terminal blocks; Multi-room amplifier outputs; Wire Size: Terminals accept up to 12 AWG; Output Power: 45 Watts/Ch. at 8 ohms, 60 Watts/Ch. at 4 ohms |
| |
FRONT, CENTER, SURROUND, BACK or ROOM 5/6 |
(7) 2-pin 7.62mm 20A detachable terminal blocks; Power amplifier outputs; Wire Size: Terminals accept up to 10 AWG; Output Power: 100 Watts/Ch. at 8 ohms, 130 Watts/Ch. at 4 ohms |
| |
Microphone (front) |
(1) 3.5mm TRS mini-phone jack (behind label strip); Input for calibrated microphone (part of CSSTK Surround Sound Tuning Kit, sold separately) |
| Connectors - Video |
| |
COMPONENT INPUTS 1 – 8 |
(24) RCA female comprising (8) component/HDTV (YPbPr) video inputs; Input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Input Impedance: 75 ohms nominal |
| |
COMPONENT OUTPUTS 1 – 2 |
(6) RCA female comprising (2) component/HDTV (YPbPr) video outputs; Output Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Output Impedance: 75 ohms nominal |
| |
S-VIDEO IN 1 – 4 |
(4) 4-pin mini-DIN female; S-Video (Y/C) video inputs w/input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (C); Input Impedance: 75 ohms nominal |
| |
S-VIDEO OUT 1 – 2 |
(2) 4-pin mini-DIN female; S-Video (Y/C) video outputs; Output Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (C); Output Impedance: 75 ohms nominal |
| |
COMPOSITE IN 1 – 4 |
(4) RCA female; Composite video inputs w/input signal sensing; Input Level: 1 Vp-p nominal; Input Impedance: 75 ohms nominal |
| |
COMPOSITE OUT 1 – 2 |
(2) RCA female; Composite video outputs; Output Level: 1 Vp-p nominal; Output Impedance: 75 ohms nominal |
| |
HDMI INPUT 1 – 3 |
(3) 19-pin Type A HDMI 1.1 digital video/audio input; includes HDCP 1.1 protocol |
| |
HDMI OUTPUT |
(1) 19-pin Type A HDMI 1.1 digital video/audio output; includes HDCP 1.1 protocol |
| Connectors – Power |
| |
FUSE |
Main fuse, T10AH; (1/4” x 1-1/4”, 250V, 10A, time-lag, high-rupture rated) |
| |
120V~50-60Hz |
(1) IEC Male; Mates with removable power cord (included) |
| |
G |
6-32 screw, chassis ground lug |
| LCD Display |
| |
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight |
| Controls and LED Indicators |
| |
THEATER OFF |
Pushbutton with green LED, turns off all theater outputs |
| |
MUTE |
Pushbutton with red LED, mutes audio in currently selected room (defaults to theater) |
| |
MODE/MENU |
(8) Pushbuttons, select mode or menu item for adjustment: SOURCE, ROOM, HOUSE, MENU, SURRND, THEATER, DISPLAY, MORE (refer to manual) |
| |
SOFTKEYS |
(4) LCD display-driven pushbuttons, select/activate various functions |
| |
ROOMS, SOURCES |
(12) Pushbuttons with green LEDs and backlit labeling strip, select room(s), input source(s), PARTY MODE, and ALL OFF |
| |
SELECT |
Continuous turn rotary encoder with adjoining “ENTER” pushbutton with green LED, for selecting sources, surround modes, rooms, radio stations, and other parameters |
| |
VOLUME |
Continuous turn rotary encoder, adjusts volume of selected room (defaults to theater) |
| |
H |
Hardware reset button, recessed, reboots the control system |
| |
S |
Software reset button, recessed, restarts the SIMPL program |
| Power Requirements |
| |
Main Power Consumption |
1000 Watts (8 Amps) @ 120 Volts AC, 50-60Hz |
| |
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |
| Environmental |
| |
Temperature |
41° to 104°F (5° to 40°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
650 BTU/hr @ 8 ohms, 750 BTU/hr @ 4 ohms; all channels loaded to 1/8 full power |
| Enclosure |
| |
Black metal with molded ABS/PC front panel; Freestanding, side ventilation should not be restricted |
| Dimensions |
| |
Height |
7.39 in (18.78 cm) |
| |
Width |
17.16 in (43.59 cm) |
| |
Depth |
18.56 in (47.13 cm) |
| Weight |
| |
55.8 lb (25.3 kg) |
| INTERNATIONAL VERSION (230 VAC) |
| |
AMSI |
| |
All the features and specifications of the AMS except: |
| |
Connectors (partial) |
| |
FUSE |
Main fuse, T5AH; (5mm x 20mm, 250V, 5A, time-lag, high-rupture rated) |
| |
220V-240V~50-60Hz |
(1) IEC Male; mates with removable power cord (included) |
| |
Power Requirements |
| |
Main Power Consumption |
1000 Watts (4 Amps) @ 220-240 Volts AC, 50-60Hz |
| |
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |