| Processor |
| |
CPU |
32-bit Freescale ColdFire® Microprocessor |
| Memory |
| |
Flash |
16 MB |
| |
SDRAM |
32 MB |
| |
NVRAM |
256 kB |
| Operating System |
| |
Real-time, preemptive, multitasking kernel, multi-threaded, FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® |
| Ethernet |
| |
10/100BaseT, static IP or DHCP/DNS, SSL, autonegotiating, full duplex TCP/IP, UDP/IP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control 2 XPanel and RoomView applications |
| Graphic Engine |
| |
16-bit non-palette graphics; 65,536 colors; Synapse image rendering algorithm; multi-mode objects, PNG translucency, full-motion (60 fps) animation, transition effects |
| Graphics Processor |
| |
CPU |
32-bit Freescale ColdFire® Microprocessor |
| Graphics Memory |
| |
Flash |
32 MB |
| |
SDRAM |
32 MB |
| Video |
| |
Scaling Processor |
Gennum VXP™ with dual channel image processor |
| |
Input Signal Types |
HDMI, DVI, component (YPbPr), S-Video (Y/C), and composite video |
| |
Output Signal Types |
HDMI, DVI, component (YPbPr), RGB |
| |
Input Formats |
NTSC or PAL, HDTV up to 1080i/1080p (1080p via HDMI/DVI only) |
| |
Input Resolutions, Interlaced |
480i, 576i, 1080i |
| |
Input Resolutions, Progressive/Non-Interlaced |
640 x 480 minimum to 1600 x 1200 @ 60Hz maximum |
| |
Output Resolutions (Progressive/Non-Interlaced Only) |
480p 60Hz, 576p 50Hz, 720p 50Hz, 720p 60Hz, 1080p 50Hz, 1080p 60Hz, 680x480 60Hz, 680x480 75Hz, 800x600 60Hz, 800x600 75Hz, 1024x768 60Hz, 1024x768 75Hz, 1280x768 60Hz, 1280x768 75Hz, 1280x1024 60Hz, 1280x1024 75Hz, 1400x1050 60Hz, 1400x1050 75Hz, 1600x1200 60Hz, 1680x1050 60Hz |
| |
Output Aspect Ratios |
4:3, 5:4, 15:9, or 16:9 based on resolution |
| |
Analog Gain |
0dB (75 ohms terminated) |
| |
Analog Bandwidth |
400MHz |
| |
Analog Crosstalk |
>54dB |
| |
Analog S/N |
>70dB |
| Audio – Surround Sound Processor |
| |
Processor |
Texas Instruments DA610 Aureus™ 32-bit floating point DSP w/Audyssey MultEQ® XT setup algorithms |
| |
Analog-To-Digital Conversion |
24-bit 48 kHz |
| |
Digital-To-Analog Conversion |
24-bit 48 kHz |
| |
Supported Formats/Modes |
Bypass, Stereo, 2-channel steering (surround or rear), Multi-channel stereo, Ambience Effects (Cathedral, Hall, Stadium, Jazz Club), Dolby® Pro Logic IIx, Dolby Digital 5.1, Dolby Digital EX, DTS Neo:6, DTS Digital 5.1 Discrete, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS 96/24 |
| |
Surround Sound Master Volume |
-80dB to +20dB, 0.5dB steps |
| |
Speaker Compensation |
±12dB, 0.5dB steps |
| |
Low Frequency Effects (LFE) |
-10dB to +0dB, 0.5dB steps |
| |
Mode Trim (Level Preset) |
±12dB, 0.5dB steps (master); ±12dB, 0.5dB steps (per output); -10dB to +0dB, 0.5dB steps (LFE) |
| |
Input Compensation |
±10dB, 1 dB steps |
| |
Mute |
-80dB (electronic), >-100dB (relay) |
| |
Bass Gain Range |
±12dB, 1 dB steps |
| |
Treble Gain Range |
±12dB, 1 dB steps |
| |
EQ Modes |
Audyssey MultEQ XT or 6-band parametric or graphic per surround/subwoofer output channel |
| |
PEQ Filter Gain |
±12dB, 0.5dB steps |
| |
PEQ Filter Bandwidth |
0.02 to 2.0 octaves |
| |
PEQ Filter Center Frequency |
20Hz to 20kHz |
| |
GEQ Filter Gain |
±10dB, 0.5dB steps |
| |
GEQ Filter Center Frequencies |
50, 180, 630, 2.3k, 8k Hz |
| |
Crossover/High-Pass Frequency |
40 to 200 Hz, 10Hz steps |
| |
Maximum Delay |
80mS per channel, picture delay (lip-sync) and speaker distance compensation combined |
| |
Dynamic Range (compression) |
Minimum, Standard, Maximum |
| |
Frequency Response |
20Hz to 20kHz ±0.01dB (preamp); 20Hz to 20kHz ±0.2dB (power amp) |
| |
THD+N |
<0.006% (preamp), 0.03% (power amp), 20Hz to 20kHz |
| |
S/N Ratio |
>100dB (preamp), 100dB (power amp) 20Hz to 20kHz A-weighted |
| |
Dynamic Range |
>113dB |
| |
Channel Separation |
>85dB (preamp), >80dB (power amp) |
| Audio – Multiroom Distribution |
| |
Typical of up to 5 Stereo, or 4 Stereo + 2 Mono Room Outputs: |
| |
Controls |
Volume, Balance, Bass, Treble, Loudness, Mute, Mono, Input Compensation |
| |
Volume Gain Range |
-80dB to +20dB, 1 dB steps |
| |
Mute |
-100dB (electronic), -120dB (relay/room off) |
| |
Input Compensation |
±10dB, 1 dB steps |
| |
Bass Gain Range |
±12dB, 2 dB steps |
| |
Treble Gain Range |
±12dB, 2 dB steps |
| |
Frequency Response |
20Hz to 20kHz ±0.4dB |
| |
S/N Ratio |
>100dB, 20Hz to 20kHz A-weighted |
| |
THD+N |
<0.08%, 20Hz to 20kHz |
| |
Stereo Separation |
>75dB |
| Connectors - Control |
| |
NET 1 – 6 |
(6) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, provide data and power for keypads and other Cresnet devices |
| |
IR OUT 1 – 8 |
(8) 3.5mm TRS mini-phone jacks, IR/Serial ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5V) up to 9600 baud |
| |
IR IN |
(1) 3.5 mm TRS mini-phone jack; For connection of the CNXRMIRD IR receiver (sold separately); Allows IR wireless control from Crestron and third-party remotes using RC-5 IR commands |
| |
INPUT 1 – 4 |
(1) 5-pin 3.5mm detachable terminal block; Comprises (4) digital inputs; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal |
| |
RELAY OUTPUT 1 – 4 |
(1) 8-pin 3.5mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
| |
COM A – B |
(2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support |
| |
COMPUTER |
(1) 6-pin RJ11 female, bidirectional RS-232 computer console port |
| |
LAN |
(1) 8-wire RJ45 with 2 LED indicators, 10/100BaseT Ethernet port; Green LED indicates link status, Yellow LED indicates Ethernet activity |
| |
NET |
(2) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, paralleled with NET ports 1 through 6; Normally connect to AAE(s) |
| |
USB (front) |
(1) USB Type B female (behind label strip); USB 1.1 computer console port (cable included) |
| Connectors - Audio |
| |
SLOT 1 – 3 |
(3) Adagio tuner card slots; accept choice of dual tuner cards; Outputs from the tuner cards parallel to ANALOG SOURCES 1 – 6 |
| |
MULTI-CHANNEL SOURCE |
(8) RCA female; Unbalanced line-level 7.1 Surround Sound audio inputs; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| |
ANALOG SOURCES 1 – 10 |
(20) RCA female comprising (10) unbalanced stereo line-level audio inputs; Inputs 1 through 6 parallel with outputs from tuner card slots; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| |
DIGITAL SOURCES 1 – 6 |
(6) RCA female; S/PDIF coaxial digital audio inputs; Input Impedance: 75 ohms |
| |
DIGITAL SOURCES 7 – 10 |
(4) JIS F05 female (TOSLINK) optical fiber connectors; S/PDIF optical digital audio inputs |
| |
OUTPUT |
(2) RCA female; Unbalanced stereo line-level audio output containing a stereo mix of all internal surround sound processor outputs; Maximum Output Level: 2.5 Vrms; Output Impedance: 50 ohms |
| |
PRE-AMP OUTPUT |
(8) RCA female; Unbalanced line-level 7.1 surround sound audio outputs; Maximum Output Level: 2.5 Vrms (front, surround, back, center); 6.3 Vrms (sub); Output Impedance: 50 ohms |
| |
SUB (balanced) |
(1) 3-pin 3.5mm detachable terminal block; Balanced line-level subwoofer audio output; Maximum Output Level: 12.6 Vrms; Output Impedance: 100 ohms |
| |
ROOM 1 – 4 |
(8) 2-pin 7.62mm detachable terminal blocks; Multi-room amplifier outputs; Wire Size: Terminals accept up to 12 AWG; Output Power: 45 Watts/Ch. at 8 ohms, 60 Watts/Ch. at 4 ohms |
| |
FRONT, CENTER, SURROUND, BACK or ROOM 5/6 |
(7) 2-pin 7.62mm 20A detachable terminal blocks; Power amplifier outputs; Wire Size: Terminals accept up to 10 AWG; Output Power: 100 Watts/Ch. at 8 ohms, 130 Watts/Ch. at 4 ohms |
| |
Microphone (front) |
(1) 3.5mm TRS mini-phone jack (behind label strip); Input for calibrated microphone (part of CSSTK Surround Sound Tuning Kit, sold separately) |
| Connectors - Video |
| |
COMPONENT INPUTS 1 – 8 |
(24) RCA female comprising (8) component/HDTV (YPbPr) video inputs; Input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Input Impedance: 75 ohms nominal |
| |
S-VIDEO 1 – 4 |
(4) 4-pin mini-DIN female; S-Video (Y/C) video inputs w/input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (C); Input Impedance: 75 ohms nominal |
| |
VIDEO 1 – 4 |
(4) RCA female; Composite video inputs w/input signal sensing; Input Level: 1 Vp-p nominal; Input Impedance: 75 ohms nominal |
| |
COMPONENT/RGB OUTPUT |
(5) BNC female; RGB or component/HDTV video output; Formats: RGBHV or YPbPr; RGB Output Level: 0.7 Vp-p nominal; HV Sync Output Level: TTL, 5 Vp-p; YPbPr Output Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Horizontal Frequency: 31.25 to 75 kHz; Vertical Frequency: 50 to 75 Hz |
| |
DVI-D IN |
(1) 24-pin DVI-D female, DVI 1.0 digital video input, includes HDCP 1.1 protocol |
| |
DVI-D OUT |
(1) 24-pin DVI-D female, DVI 1.0 digital video output, includes HDCP 1.1 protocol |
| |
HDMI INPUT 1 – 3 |
(3) 19-pin Type A HDMI (V.1.3 with Deep Color) 1.3 digital video/audio input; includes HDCP 1.1 protocol |
| |
HDMI OUTPUT |
(1) 19-pin Type A HDMI (V.1.3 with Deep Color) digital video/audio output; includes HDCP 1.1 protocol |
| Connectors – Power |
| |
FUSE |
Main fuse, T10AH; (1/4” x 1-1/4”, 250V, 10A, time-lag, high-rupture rated) |
| |
120V~50-60Hz |
(1) IEC Male; Mates with removable power cord (included) |
| |
G |
6-32 screw, chassis ground lug |
| LCD Display |
| |
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight |
| Controls and LED Indicators |
| |
THEATER OFF |
Pushbutton with green LED, turns off all theater outputs |
| |
MUTE |
Pushbutton with red LED, mutes audio in currently selected room (defaults to theater) |
| |
MODE/MENU |
(8) Pushbuttons, select mode or menu item for adjustment: SOURCE, ROOM, HOUSE, MENU, SURRND, THEATER, DISPLAY, MORE (refer to manual) |
| |
SOFTKEYS |
(4) LCD display-driven pushbuttons, select/activate various functions |
| |
ROOMS, SOURCES |
(12) Pushbuttons with green LEDs and backlit labeling strip, select room(s), input source(s), PARTY MODE, and ALL OFF |
| |
SELECT |
Continuous turn rotary encoder with adjoining “ENTER” pushbutton with green LED, for selecting sources, surround modes, rooms, radio stations, and other parameters |
| |
VOLUME |
Continuous turn rotary encoder, adjusts volume of selected room (defaults to theater) |
| |
H |
Hardware reset button, recessed, reboots the control system |
| |
S |
Software reset button, recessed, restarts the SIMPL program |
| Power Requirements |
| |
Main Power Consumption |
1000 Watts (8 Amps) @ 120 Volts AC, 50-60Hz |
| |
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |
| Environmental |
| |
Temperature |
41° to 104°F (5° to 40°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
1600 BTU/hr @ 8 ohms, 2000 BTU/hr @ 4 ohms; all channels loaded to 1/8 full power |
| Enclosure |
| |
Black metal with molded ABS/PC front panel; Freestanding, side ventilation should not be restricted |
| Dimensions |
| |
Height |
7.39 in (18.78 cm) |
| |
Width |
17.16 in (43.59 cm) |
| |
Depth |
18.80 in (47.75 cm) |
| Weight |
| |
57.5 lb (26.1 kg) |
| INTERNATIONAL VERSION (230 VAC) |
| |
AMSI-AIP |
| |
All the features and specifications of the AMS-AIP except: |
| |
Connectors (partial) |
| |
FUSE |
Main fuse, T5AH; (5mm x 20mm, 250V, 5A, time-lag, high-rupture rated) |
| |
220V-240V~50-60Hz |
(1) IEC Male; mates with removable power cord (included) |
| |
Power Requirements |
| |
Main Power Consumption |
1000 Watts (4 Amps) @ 220-240 Volts AC, 50-60Hz |
| |
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |