| Wireless |
| |
RF Transceiver |
infinNET EX™ 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant; |
| |
Range (typical) |
100 feet indoor, subject to site-specific conditions |
| |
Maximum 16 remotes per gateway |
| Ethernet |
| |
10BaseT/100BaseTX, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, IEEE 802.3U & 802.3af compliant
|
| Controls and LED Indicators |
| |
PWR |
(1) Green LED, indicates operating power supplied from Cresnet network or PoE |
| |
NET |
(1) Yellow LED, indicates communication with the Cresnet system |
| |
ACTIVITY |
(1) Red LED, indicates wireless communications |
| |
ACQUIRE |
(1) Recessed pushbutton with red LED, used to set up connections with wireless devices |
| |
SETUP |
(1) Recessed pushbutton with red LED, used to set up connection with the control system via Cresnet or Ethernet
|
| Connectors |
| |
Antenna |
(1) Connection for supplied antenna |
| |
LAN PoE |
(1) 8-wire RJ45, female, w/(2) LED indicators; 10BaseT/100BaseTX Ethernet port, 802.3af Power over Ethernet compliant; Green LED indicates link status; Yellow LED indicates Ethernet activity |
| |
NET |
(1) 3.5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network |
| Power Requirements |
| |
PoE |
<45mA @ 48 Volts DC |
| |
Cresnet Power Usage |
2 Watts (0.09 Amps @ 24 Volts DC) |
| |
Note: May be powered by PoE or Cresnet network power.
|
| Enclosure |
| |
Aluminum w/polycarbonate label overlay, freestanding or surface mount with (4) integral mounting flanges |
| Environmental |
| |
Temperature |
41° to 104°F (5° to 40°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
7 BTU/Hr |
| Dimensions |
| |
(Without antenna) |
| |
Height |
6.41 in (16.27 cm) |
| |
Width |
3.91 in (9.94 cm) |
| |
Depth |
1.43 in (3.62 cm) |
| Weight |
| |
13.1 oz (373 g) |