facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

TPMC-8X-DSW

Wanddockingstation für TPMC-8X-GA

Wanddockingstation für TPMC-8X-GA Touchpanel mit integriertem Diebstahlschutz und motorisiertem Haltearm. Stromversorgung via Cresnet Bus. Das TPMC-8X-GA mit angestecktem Zusatzakku (TPMC-8X-BTPE) sowie ein zusätzlicher TPMC-8X-BTPE im separaten Ladefach können gleichzeitig geladen werden; 10/100 MBit Ethernet Verbindung über Kabel. Erfordert externes 75 W Netzteil.

The TPMC-8X-DSW Wall Mount Docking Station facilitates charging of an Isys® TPMC-8X-GA WiFi Touch Screen while simultaneously enabling fully wired touch screen operation.

Secure Wall Mount Dock
While docked, the touch screen is secured in place by an electronic latch. The touch screen lays flush within the docking station providing a refined appearance while prohibiting prying fingers or an accidental bump from dislodging it. When released, the mechanism gently extends the touch screen outward, ready to be disengaged for wireless use.

Pass code protection can be employed on the touch screen to prevent unauthorized removal from the docking station. All functions of the docking station can also be controlled programmatically from the control system via Ethernet, and through Crestron RoomView® or Fusion RV™ software. A hardware key is provided to release the touch screen from the docking station in the case of a power failure.

High-Speed Connectivity
On the rear of the TPMC-8X-DSW, a 10/100 Ethernet port provides for direct connection to a wired LAN, allowing fully wired operation of the touch screen while docked. Two (2) USB ports are included to support a wired mouse and keyboard (not included).

Audio Output
A balanced line output allows for connection to Sonnex™, Adagio®, and other multi-room audio distribution systems using CAT5 or conventional wiring. Through this connection, streaming audio content playing on the touch screen can be shared with listeners throughout the home or office.

Multi-Battery Charger
The TPMC-8X-DSW not only charges the touch screen's internal battery, it can charge an optional external battery pack as well. In fact, it can charge one external battery pack attached to the touch screen while simultaneously charging a second spare external battery pack placed in its own charging slot within the docking bay. The spare battery pack can even be left in place to charge while the touch screen is removed, keeping one battery pack charging at all times.[1]

IMPORTANT: This spec sheet is for TPMC-8X-DSW, Material # 6504859, which is compatible with the TPMC-8X-GA, as well as with previous model TPMC-8X touch screens. Owners of an older model TPMC-8X-DSW who wish to use it with a TPMC-8X-GA must contact Crestron Customer Support to acquire the TPMC-8X-DSW BEZEL CONVERSION KIT, Material # 6505136.

Notes:

  1. TPMC-8X-GA touch screen and all battery packs sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

Adagio, Crestron, Crestron RoomView, Fusion RV, Isys, Sonnex, and the Crestron logo are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

Connectors
PWR (1) 2-pin 3.5mm detachable terminal block;
24 Volt DC power input;
Wire Size: 18 AWG maximum
LAN 8-wire RJ45, 10Base-T/100Base-TX Ethernet port
USB (2) USB Type A female;
USB 2.0 ports for keyboard, mouse, and storage devices
AUDIO (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output
Docking Port Mates with the touch screen while docked[1]
Controls & Indicators
Power/Suspend (1) Pushbutton, activates the POWER/SUSPEND function on the touch screen[1]
Charging Status (1) Dual-color LED, orange indicates an external battery pack is charging in the spare battery slot, green indicates battery is fully charged[1]
Docked Sensor (1) Sensor integrated into docking station bezel, senses when a touch screen is docked
Audio Output (1) 2-position switch (behind front bezel), enables/disables AUDIO connector
LAN (2) LEDs on side panel LAN port, green indicates Ethernet link status, amber indicates Ethernet activity
Power Requirements
75 Watts (3.13 Amps) @ 24 Volts DC;
Requires dedicated CNPWS-75 or dedicated channel of C2N-SPWS300, both sold separately
Environmental
Temperature 41° to 122°F (5° to 50°C)
Humidity 10% to 90% RH (non-condensing)
Enclosure
Chassis Metal, flush-mountable (all mounting accessories sold separately)
Faceplate Plastic, color-matched to touch screen
Dimensions
Height 10.16 in (258 mm)
Width 11.74 in (298 mm)
Depth 3.67 in (93 mm)
Weight
4.7 lb (2.13 kg)

Publications

Spec Sheet

Spec Sheet (PDF - 1.1 M)
Rev. Date: 2/21/2012

Installation and Operations Guide

Installation And Operations Guide (PDF - 1.0 M)
Doc. No. 6588B
Rev. Date: 9/1/2008
Note: Only docks with the TPMC-8X

Installation and Operations Guide

Installation And Operations Guide (PDF - 790 K)
Doc. No. 7080A
Rev. Date: 9/4/2012
Note: Wall Mont Dock for TPMC-8X and TPMC-8X-GA

Installation Guide

Installation Guide (PDF - 1.66 M)
Doc. No. 7144A
Rev. Date: 8/30/2011
Note: Installation Guide for Bezel Kit

Cut-Out Template

Cut-Out Template (ZIP - 1.1 M)
Rev. Date: 1/29/2010
Note: Part No. 40093

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing
Note: For 6501719.

Zoomable Drawing

Zoomable Drawing
Note: For 6504859.

Cad Files

Cad Files (ZIP - 717 K)
Rev. Date: 2/24/2011

Available Models

Model Description

TPMC-8X-DSW

Wall Mount Docking Station for TPMC-8X or TPMC-8X-GA

 

 

 

 

Available Accessories

Model Description

BB-8X-DSW

Pre-Construction Wall Mount Back Box

 

 

 

PMK-8X-DSW

Pre-Construction Wall Mount Kit

 

 

 

MMK-8X-DSW

Mud Ring

 

 

 

TMK-8X-DSW

Trim Ring

 

 

 

WMKM-8X-DSW

Post-Construction Wall Mount Kit with Mud Ring

 

 

 

WMKT-8X-DSW

Lectern or Post-Construction Wall Mount Kit with Trim Ring

 

 

 

CNPWS-75

Cresnet Power Supply, 75 Watts

 

 

 

CNPWSI-75

Cresnet Power Supply, 75 Watts - International Version, 230V

 

 

 

Invitation to Tender

TPMC-8X-DSW (TXT - 256 B)
Letzte Änderung 11.11.2012