facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CP2E

Steuerungssystem mit Ethernet

Komplettes Steuerungssystem, 1 HE, 32 Bit Motorola ColdFire Prozessor, Anschluss für Cresnet Bus, 3 bidirektionale RS-232/422/485 Schnittstellen, 8 IR/unidirektionale RS-232/422/485 Schnittstellen, 8 Relaisausgänge, 8 Digital Ein-/Ausgänge oder analoge Eingänge, Ethernetport, Ethernetschnittstelle mit eigenem Webserver, externes Netzteil erforderlich.

Crestron 2-Series Control Systems are the brain of a complete integrated AV or automation solution. Every audio, video, and environmental element of the home, boardroom, classroom, or command center becomes integrated and accessible through the control system. Crestron 2-Series control systems are unmatched for power, performance and scalability, providing the ideal choice for today's demanding control applications.

The CP2E is a compact Ethernet control system designed for small to medium sized residential and commercial control applications. Three built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and Ethernet provide for control of video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. Additional control ports may be added using Cresnet expansion modules, or by "slaving" additional control processors such as the CP2.

2-Series Engine
At the heart of the CP2E is the powerful 32-bit Freescale ColdFire® processor. Crestron's exclusive enhanced real-time operating system makes the CP2E the fastest, most reliable control system available.

Cresnet®
Cresnet is the communications backbone for many Crestron touchpanels, keypads, lighting controls, and other devices. The Cresnet bus is a simple, yet flexible 4-wire network that provides rock-solid bidirectional communication for numerous Cresnet devices.

Cresnet Slave Mode
Selectable Cresnet Slave Mode enables the CP2E to be configured as a Cresnet slave device, effectively transforming it into a Cresnet expansion module. Such flexibility can offer a cost-effective solution for system expansion, providing a host of additional control ports in a single module.

Ethernet
Crestron pioneered the IP-based control system to harness the vast possibilities of Ethernet and the Internet for remote control, monitoring, programming, and diagnostics. The CP2E is designed to deliver the world's most advanced IP control solution with full-duplex 10/100 Ethernet, built-in Web server and email client, and support for both static and dynamic IP addressing.

e-Control®2
Crestron's award-winning e-Control 2 XPanel solutions offer the most flexible range of IP control possibilities available. Using a Windows® computer or CE/PocketPC™ PDA device, e-Control 2 provides an amazing control GUI that looks and behaves just like a Crestron Isys® touchpanel.

RoomView™
Every Ethernet-enabled 2-Series control system works directly with Crestron's exclusive RoomView Help Desk software for the industry's most comprehensive facility-wide asset management solution.

SNMP
Built-in SNMP support enables network management of Crestron control systems using third-party SNMP software. As an alternate or supplement to RoomView, SNMP allows full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.

SSL
All Ethernet-enabled 2-Series control systems support SSL (Secure Sockets Layer), the industry standard for protecting sensitive network communications.

Key Features

 

  • 2-Series engine | Dual-bus architecture
  • Cresnet port - master/slave selectable
  • 10/100 Ethernet | SSL encryption
  • e-Control 2 and RoomView enabled | SNMP support
  • 3 Com ports (RS-232/422/485)
  • 8 IR/serial ports
  • 8 Versiport I/O ports
  • 8 Low-voltage relay ports
  • Single-space EIA rack-mountable

Processor
  CPU 32-bit Freescale ColdFire® Microprocessor
Memory
  SDRAM 32 MB
  NVRAM 256 KB
  Flash 4 MB
Operating System
  Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+®
Ethernet
  10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications
Connectors
  COM A - C (3) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator
  INFRARED-SERIAL OUTPUT A - H (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports
  I/O Versiports 1 - 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin
  RELAY OUTPUT 1 - 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  COMPUTER (1) DB9 female, RS-232 computer console port
  NET (1) 4-pin 5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator
  24VDC (1) 2.1mm barrel DC power jack, 24 Volt DC power input;
(PW-2420RU power supply sold separately);
Passes through to NET port to power Cresnet devices
Reset Buttons
  HW-R Hardware reset (reboots the control system)
  SW-R Software reset (restarts the SIMPL program)
LED Indicators
  PWR (1 green) Indicates DC power supplied to unit
  NET (1 yellow) Indicates Cresnet bus activity
  MSG (1 red) Indicates control system has generated an error message
  LNK (1 red) Indicates a valid connection on LAN port
  ACT (1 red) Indicates activity on LAN port
Power Requirements
  24 Watts (1 Amp) @ 24 Volts DC (PW-2420RU power supply sold separately)
  Available Cresnet Power 26 Watts using PW-2420RU (sold separately)
  Cresnet Power Usage 24 Watts (1 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Chassis Steel, black matte powder coat finish
  Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
  Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
  Height 1.80 in (4.57 cm);
1.70 in (4.32 cm) without feet
  Width 17.03 in (43.24 cm);
19.0 in (48.26 cm) with ears
  Depth 6.66 in (16.91 cm)
Weight
  3.54 lbs (1.59 kg)

DigitalMedia: Residential Multi-Room Distribution
Models Included: AAE, CP2E, DM-MD8X8, DM-TX-300N, MP-WP140, MP-WP152

Multi room distribution in residential environments involves the combining of several sources and format types to different makes and resolutions of displays. Crestron Digital Media enables the distribution, resolution determination and HDCP management across a minimal whole home infrastructure. DM allows a homeowner to play the content where they want it, when they want without comprising resolution. Features: Multi-source, multi-room HDMI distribution; Remote located sources using DM transmitters; Up to 8 sources and 8 displays.

Application Diagram (PDF - 2.87 M)
Rev. Date: 12/8/2009

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 1.0 M)
Doc. No. 5980A
Rev. Date: 6/1/2006

Reference Guide

Reference Guide (PDF - 2.07 M)
Doc. No. 4579G
Rev. Date: 9/15/2014
Note: IP Considerations Guide. This guide is intended to outline the requirements, best practices and preferred methods of implementing Crestron devices on enterprise level networks.

Reference Guide

Reference Guide (PDF - 3.4 M)
Doc. No. 6256A
Rev. Date: 3/1/2006
Note: This file incorporates four previously released documents:

  • Console Commands for 2-Series Control Systems
  • Error Messages for 2-Series Control Systems
  • Isys Join Number Remapping
  • Master-Slave Mode Reference Guide

Engineering Specs

Engineering Specs (PDF - 17 K)
Rev. Date: 11/4/2006

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 543 K)
Rev. Date: 2/24/2006

Available Models

Model Description      

CP2E

Compact Control System with Ethernet

 

 

 

 

Available Accessories

Model Description      

C2N-HBLOCK

Multi-type Cresnet Distribution Block

 

 

 

CNSP-XX

Custom Serial Interface Cable

 

 

 

IRP2

IR Emitter Probe

 

 

 

PW-2420RU

Power Pack, Desktop, 24VDC, 2A (50 Watts), Regulated, US/International

 

 

 

Invitation to Tender

CP2E (TXT - 804 B)
Letzte Änderung 11.11.2012