facebook Google+ twitter flickr youtube in crestron
Kontakt:  +49 731 96281-0


Steuerungssystem mit Display

Komplettes Steuerungssystem mit programmierbarem LCD-Display für Crestron Lighting und Gebäudemanagement Anwendungen. Wandmontage in Three-Gang-Box, 32 Bit Motorola ColdFire Prozessor. Flash ROM für den Programmspeicher. Enthalten sind: 4 Relais, 10/100 Ethernetport Ethernetschnittstelle mit eigenem Webserver, 2 Cresnet-Ports, 2 RS-232-Ports, 4 digitale /analoge Eingänge, Lichtsensor, IR-Empfänger. Nur 10 W Leistungsaufnahme. Externes Netzteil 24 V erforderlich.
IPAC-GL1-B-T: Gehäuse schwarz
IPAC-GL1-W-T: Gehäuse weiß

The Crestron IPAC is a 2-Series control processor designed for wall mount installation. Its front panel controls and LCD display deliver a user-friendly interface for out-of-the-box system setup. Built-in Ethernet, Cresnet, RS-232, relay, and sensor inputs provide direct connectivity for interfacing with all kinds of devices, controls, and networks. The onboard e-Control® Web server allows for complete integration as part of a facility-wide managed control network.

Out-of-the-Box Lighting Control
The GL1 version of IPAC comes preconfigured for use as the central control processor for a Green Light Power Switching system. Right out of the box, the IPAC-GL1 affords easy setup and programming for a complete switching system consisting of:

Up to 210 switched loads
CNX-B, C2N-DB, and Cameo keypads
41 occupancy sensors and photosensors
100 time clock events

Keypads with as many as 12 buttons each can be programmed easily to control lighting loads and other functions. As well, the seven function buttons on the front panel of the IPAC-GL1 may also be programmed. Custom backlit labeling of the front panel buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software.

Lights can be programmed to turn on and off automatically using the built-in astronomical time clock feature. Lighting events may be programmed to occur at specific times or at an offset from sunrise or sunset. Occupancy sensors and photosensors may also be implemented to enable automatic on/off lighting control based on room occupancy and ambient light levels.

Custom Programmability
With additional custom programming, the IPAC-GL1 can support virtually any functionality imaginable. It works seamlessly with Crestron's entire line of touchpanels, wireless remotes, lighting dimmers, shade controllers, thermostats, and more. It can also interface with third-party devices and systems such as security and access controls, surveillance cameras, and HVAC for a fully integrated solution. Contact Crestron Sales Support Services for more information.

The IPAC-GL1 is designed to be mounted in a standard 3-gang electrical box independent of the lighting panels, allowing it to be installed wherever it is most advantageous for the project.

Key Features


  • Wall mount lighting control processor
  • Crestron 2-Series control engine
  • Easy system programming via LCD front panel
  • 7 programmable buttons with LED feedback
  • Customizable backlit button labels
  • CEC Title 24 listed
  • Astronomical time clock
  • Occupancy sensing and daylight harvesting
  • 2 RS-232, 4 digital/analog input, & 4 relay control ports
  • Cresnet and 10/100 Ethernet communications
  • Onboard e-Control® Web server
  • RoomView® and SNMP remote management
  • SSL (Secure Sockets Layer) network protection
  • Extensively programmable via PC software
  • 3-gang wall-mountable
  • Available in white or black


2009 Innovative Housing Technology Awards - Lighting Control/Shade Control

Lighting and Shade Control - IPAC-GL1

The IPAC-GL1 Integrated Professional Automation Computer for Green Light Power Switching received the prestigious housing technology award for Lighting and Shade Control, presented by TecHome Builder magazine.

The IHTA Awards honors the most innovative products, builders and custom electronics pros serving the homebuilding industry. A panel of tech building industry experts and journalists evaluated the 2009 finalists and made the tough choices.

The winners represent best practices by CE pros, builders, home technology makers and IT innovators. The awards are presented every June in conjunction with the Pacific Coast Builders Conference in San Francisco.


  CPU 32-bit Freescale ColdFire® Microprocessor
  Flash 8 MB
  Power Failure Memory 10 years
Time Clock
  Accuracy ±1 minute per year
Operating System
  Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; includes default program for Green Light Power Switching systems
  10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP, DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView® applications
  NET (2) sets of (4) captive screw terminals;
Cresnet port and 24 Volt DC power input with parallel pass-thru;
Connects to GLPS switching panels, GLS sensors (via GLS-SIM modules), and keypads (CNX-B, C2N-DB, C2N-CBD-TS, or C2N-CBF-T);
Default program supports up to 9 panels with 42 loads each, 40 sensors (via 20 GLS-SIM modules), and 16 keypads via Cresnet
  LAN (1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
  Ground (1) flying lead, chassis ground wire
  COM 1* (5) captive screw terminals;
Bidirectional RS-232 port;
Up to 115.2k baud; hardware and software handshaking support
  COM 2* (3) captive screw terminals;
Bidirectional RS-232 port;
Up to 115.2k baud; software handshaking only
  RELAYS 1 – 4* (6) captive screw terminals comprising (4) normally open, isolated relays (every two share a common);
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
  INPUTS 1 – 4 (5) captive screw terminals comprising (4) digital or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.25 Volts DC;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin;
Default program supports connection of one occupancy sensor or photo sensor (Input 1), one Override signal (Input 2), and Lockout signals for the IPAC front panel or external keypads (Inputs 3 and 4)
  Computer (1) USB Type B female (behind front cover);
USB 1.1 computer console port (cable included)
LCD Display
  Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight
Controls and Indicators
  Selection Knob (1) continuous turn rotary encoder, adjusts menu parameters
  ENTER (1) pushbutton, selects underlined item and stores settings
  HOME (1) pushbutton, returns to the home page
  BACK (1) pushbutton, returns to the previous page
  CANCEL (1) pushbutton, cancels current action without saving
  HELP (1) pushbutton, opens context-sensitive help screen
  Soft Keys (4) pushbuttons for activation of LCD driven functions
  Function Buttons (7) Programmable pushbuttons with backlit label slot
  Feedback Indicators (7) Programmable red LEDs (1 per Function Button)
  HW-R (1) Recessed miniature pushbutton for hardware reset (reboots the processor)
  SW-R (1) Recessed miniature pushbutton (behind front cover) for software reset (restarts the SIMPL program)
Light Sensor
  Photosensor, programmable for auto-dimming of front panel label backlight and other functions
IR Receiver*
  Reception Frequency 36 to 38 kHz IR
  Formats Crestron format, RC5
  Range Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength
Power Requirements
  Cresnet Power Usage 10 Watts (0.42 Amps @ 24 Volts DC);
GLA-PWS50 or equivalent power supply required (sold separately)
  Available Cresnet Power 40 Watts using GLA-PWS50 power supply (sold separately)
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 20 BTU/hr
  Faceplate High-impact plastic, black or white, with polycarbonate label overlay
  Chassis Injection-molded plastic with steel mounting plate
  Mounting Requires 3-gang plaster ring or electrical box (≥2.5 inch deep recommended)
  Height 4.50 in (11.5 cm)
  Width 6.70 in (17.1 cm)
  Depth 2.23 in (5.7 cm)
  1.4 lb (0.64 kg)
Testing & Compliance
  UL Listed, FCC Part 15, CEC Title 24

* This feature is not utilized by the default program.

Standard button labels that ship with IPAC

Typical IPAC-GL1 Connections
Models Included: IPAC-GL1

Shows typical connections to and from an IPAC-GL1.

Application Diagram (PDF - 1.46 M)
Rev. Date: 1/7/2009

Application Diagram


Spec Sheet

Spec Sheet (PDF)


Manual (PDF - 1.8 M)
Doc. No. 6660B
Rev. Date: 10/30/2009
Note: Setup


Manual (PDF - 355 K)
Doc. No. 6784B
Rev. Date: 10/30/2009
Note: Worksheets

Reference Guide

Reference Guide (PDF - 267 K)
Rev. Date: 3/31/2009
Note: Standard button labels that ship with IPAC.

Design Guide

Design Guide (PDF - 5.34 M)
Doc. No. 4775B
Rev. Date: 7/15/2013
Note: Crestron Green Light Commercial Lighting Design Guide. This design guide provides information on lighting system design using the wide range of products found in the Crestron Green Light family.

Installation Guide

Installation Guide (PDF - 1.5 M)
Doc. No. 6696A
Rev. Date: 12/1/2008

Engineering Specs

Engineering Specs (.DOCX - 77 K)
Rev. Date: 12/15/2014
Note: CSI Guide Specification for Lighting Control System

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 1.8 M)
Rev. Date: 1/6/2009

Revit Files

Revit (ZIP - 382 K)
Rev. Date: 8/29/2011

Available Models

Model Description      


Integrated Professional Automation Computer for Green Light Power Switching Systems, Black





Integrated Professional Automation Computer for Green Light Power Switching Systems, White





Available Accessories

Model Description      


Wall Mount 50 Watt Cresnet Power Supply





Wall Mount 50 Watt Cresnet Power Supply - International Version
Only for: IPAC-GL1-B-T





Swivel Mount Kit





Table Top Kit, Black





Table Top Kit, White




Invitation to Tender

IPAC-GL1-B-T (TXT - 2.49 KB)
Letzte Änderung 04.08.2014

Invitation to Tender

IPAC-GL1-W-T (TXT - 2.48 KB)
Letzte Änderung 04.08.2014