| Audio |
|
| Output Power |
20Hz to 20kHz, both channels driven at rated THD:
60 watts per channel at 8 ohms
90 watts per channel at 4 ohms
200 watts at 8 ohms bridged
|
|
| Power Bandwidth |
3Hz to 50kHz, +0/-3dB |
|
| Frequency Response |
20Hz to 20kHz, +0/-0.1dB at 1 watt, 8 ohms |
|
| Total Harmonic Distortion (THD) |
≤0.03% at full power |
|
| SMPTE I.M. Distortion |
≤0.03% |
|
| S/N Ratio |
>110dB A-weighted |
|
| Gain |
28dB |
|
| Damping Factor |
>400 |
|
| Channel Separation |
>100dB, 20Hz to 20kHz |
| Connectors |
|
| INPUTS |
(2) RCA female;
Unbalanced stereo or mono line-level audio input;
Input Impedance: 28k ohms |
|
| 4-8 OHM OUTPUTS |
(2) Dual 5-way binding posts;
Stereo, summed-mono, or bridged-mono speaker-level audio output;
Output Power: 60 Watts/Ch. @ 8 ohms, 90 Watts/Ch. @ 4 ohms, 200 Watts bridged at 8 ohms |
|
| G |
6-32 screw, chassis ground lug |
|
| NET |
(1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network |
|
| 120V AC 60Hz |
(1) IEC male and main fuse holder;
IEC: Mates with removable power cord (included);
Fuse: 3AG, 8 Amps, 250 Volts, fast-acting |
| Controls & LED Indicators |
|
| POWER (front) |
(1) Toggle switch with (1) green LED, enables/disables main power if Cresnet power and mains power are connected |
|
| INPUTS (rear) |
3-position toggle switch; selects ST (stereo), SUMMING, or BRIDGED mode |
|
| PWR (rear) |
(1) green LED, indicates 24 Volts DC power supplied from Cresnet control network |
|
| NET (rear) |
(1) yellow LED, indicates communication with Cresnet system |
|
| OVERRIDE/SETUP (rear) |
(1) miniature pushbutton and (1) red LED, overrides control system to activate main power; Cresnet power and mains power must be connected; also used for touch-settable ID (TSID) |
| Power Requirements |
|
| Main Power |
120 Volts AC ±10%, 50-60 Hz, 960 Watts |
|
| Cresnet Power Usage |
3 Watts (0.125 Amps @ 24 Volts DC) |
| Environmental |
|
| Temperature |
41° to 104°F (5° to 40°C) |
|
| Humidity |
10% to 90% RH (non-condensing) |
| Enclosure |
|
| Black metal, 2U high x 0.5U wide 19-inch rack-mountable (rack shelf provided by others) |
| Dimensions |
|
| Height |
4.18 in (10.62 cm);
3.47 in (8.81 cm) without feet |
|
| Width |
8.48 in (21.54 cm) |
|
| Depth |
14.78 in (37.54 cm) |
| Weight |
|
| 20.0 lbs (9.0 kg) |
| INTERNATIONAL VERSION (230 VAC) |
|
| CNAMPXI-2X60 |
|
| All the features and specifications of the CNAMPX-2X60 except: |
|
| Connectors (partial) |
|
| 4-8 OHM OUTPUTS |
(2) Dual binding posts;
(Banana plugs prohibited);
Stereo, summed-mono, or bridged-mono speaker-level audio output;
Output Power: 60 Watts/Ch. @ 8 ohms, 90 Watts/Ch. @ 4 ohms, 200 Watts bridged at 8 ohms |
|
| 230V AC 50Hz |
(1) IEC male and main fuse holder;
IEC: Mates with removable power cord (included);
Fuses: (2) M205, 5 Amps, 250 Volts, fast-acting |
|
| Power Requirements |
|
| Main Power |
230 Volts AC ±10%, 50-60 Hz, 960 Watts |
|
| Cresnet Power Usage |
3 Watts (0.125 Amps @ 24 Volts DC) |
