facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

DIN-BLOCK

12-fach Cresnet Busverteiler

12-fach Cresnet Busverteiler zur Hutschienenmontage. 12 Cresnet Bus-Anschlüsse, Cresnet Spannungsverteilung in zwei Gruppen mit jeweils sechs Steckverbindern. Spannungseingang für jede Gruppe. LED Spannungsversorgungsanzeige für jede Gruppe. Format 6 TE.

The DIN-BLOCK is a DIN rail-mounted Cresnet distribution block designed to facilitate the termination of Cresnet wiring at a head end or distribution point. DIN rail mounting enables modular installation alongside Crestron DIN Rail lighting and automation control modules and other third-party DIN rail mountable devices.

Cresnet® Distribution
Cresnet is the communications backbone for Crestron lighting modules, wall box dimmers, shade controllers, thermostats, keypads, touchpanels, and many other devices. This flexible 4-wire bus allows for combinations of homerun and daisy-chain wiring, and the DIN-BLOCK provides a simple means for connecting up to 12 separate Cresnet cables in parallel as part of any-sized network.

Cresnet Power Distribution
In addition to data, Cresnet carries 24 Volts DC for powering the devices connected to it. The Cresnet ports on the DIN-BLOCK are arranged into 2 separate power groups, providing an easy way to manage the distribution of power for a complete Cresnet network. A separate power supply may be dedicated to each group, or a single supply can be connected to both groups as needed. Each group supports up to 75 Watts.

DIN Rail Installation
The DIN-BLOCK is designed to snap onto a standard DIN rail for installation in a wall mount enclosure or mounted on a wall panel. Wiring connections are made using detachable screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. Diagnostic indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-BLOCK's front panel stays visible while the connections are concealed.

Key Features

 

  • 12 port Cresnet distribution block
  • Detachable screw terminal blocks for easy termination and troubleshooting
  • Split power bus for flexible 24V power distribution
  • Diagnostic LEDs for network power and data
  • Passive device — no programming required
  • 6M wide DIN rail mounting

Connections
  POWER A (6) 4-pin 3.5mm detachable terminal blocks, paralleled;
Power Group A Cresnet distribution ports;
Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC)
  POWER B (6) 4-pin 3.5mm detachable terminal blocks, paralleled;
Power Group B Cresnet distribution ports;
Maximum Load: 75 Watts (3.13 Amps @ 24 Volts DC)
  Note: ‘Y’, ‘Z’, and ‘G’ terminals are paralleled between power groups
LED Indicators
  POWER A – B (2 green) Indicate Cresnet power present at any NET port of each corresponding power group
  Y, Z (2 red) Indicate Cresnet Y and Z data activity at any NET port
Power Requirements
  Cresnet Power Usage 0.3 Watts (0.01 Amp @ 24 Volts DC)
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 1 BTU/hr
Enclosure
  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm)
Dimensions
  Height 3.71 in (9.42 cm)
  Width 4.18 in (10.60 cm)
  Depth 2.29 in (5.80 cm)
Weight
  5.3 oz (145 g)

C2N-UNI8IO with DIN-Rail
Models Included: C2N-SDC-DC, C2N-UNI8IO, CHV-THSTAT, DIN-1DIMU4, DIN-AP2, DIN-BLOCK, GLS-ODT-C-500, TPS-4L

C2N-UNI8IO with typical DIN-rail lighting automation system.

Application Diagram (PDF - 1.05 M)
Rev. Date: 3/31/2010

Application Diagram

Typical DIN-BLOCK Application
Models Included: DIN-BLOCK

Shows typical connections to and from a DIN-BLOCK.

Application Diagram (PDF - 576 K)
Rev. Date: 7/8/2008

Application Diagram

Publications

Spec Sheet

Spec Sheet (PDF)

Installation and Operations Guide

Installation And Operations Guide (PDF - 4.6 M)
Doc. No. 6670A
Rev. Date: 5/1/2008

Engineering Specs

Engineering Specs (PDF - 293 K)
Rev. Date: 10/31/2008
Note: This document covers the DIN Rail lighting control products series.

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 597 K)
Rev. Date: 4/21/2008

Available Models

Model Description      

DIN-BLOCK

DIN Rail Cresnet Distribution Block

 

 

 

Invitation to Tender

DIN-BLOCK (TXT - 915 B)
Letzte Änderung 11.11.2012