facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CLXI-2DIM2

Phasenanschnittsdimmer 2x2300 Watt

2 Kanal Phasenanschnittsdimmer mit 2x2300 Watt pro Kreis. Maximale Modulleistung 4600 Watt. Zweimal Anschluss mit derselben Phase. Pro Schaltschrank wird ein CAEN-BLOCK oder ein PAC2/PAC2M benötigt. Befestigung erfolgt auf Montageplatte. Maße: 175x192x87 mm.

As part of a complete Crestron lighting system, the CLXI-2DIM2 lighting control module provides 2 independent channels of dimming for 230V incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 2300 Watts, with a total module rating of 4600 Watts when fed from two separate 16 Amp feeds. Air-gap relays are provided on each channel output allowing an individual circuit to be serviced without disabling the entire module.

CLXI-Series dimmers are rigorously built using 40 Amp triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.

An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.

The CLXI-2DIM2 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-2DIM2 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLXI modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

Load Ratings
  Dimmer Channels 2
  Per Channel 10 Amps (2300 Watts)
  Module Total 20 Amps (4600 Watts)
  Load Types Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescent
Power Requirements
  230 Volts AC, 50/60Hz, single-phase;
All feeds must be same phase or split phase
Connectors on Module
  Module Interconnect (2) 5-pin 0.156 inch headers;
Cresnet/Override interconnect ports;
Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLXI-Series module using interconnect cable provided
Connections via CLTI or CLTIBN Terminal Block (sold separately)
  LINE 1 - 2 (2) DIN rail terminal blocks, brown, line power inputs;
Must be same phase or split phase
  DIM 1 - 2 (2) DIN rail terminal blocks, red, channel outputs
  N IN 1 - 2 (2) DIN rail terminal blocks, blue, line input neutrals
  N OUT 1 - 2 (2) DIN rail terminal blocks, blue, channel output neutrals
Buttons
  SETUP Used for manual channel activation and TSID
LED Indicators
  PWR (green) Indicates line power is applied to the LINE terminal
  NET (yellow) Indicates communication with the control system
  1 – 2 (red x2) Indicates state of each channel
  SETUP (red) Indicates unit is in setup/manual mode
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 114 BTU/Hr at maximum load
Enclosure
  Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in any CAEN or CAENIB enclosure
Dimensions
  Height 7.59 in (19.27 cm)
  Width 6.92 in (17.57 cm)
  Depth 3.43 in (8.70 cm)
Weight
  3.00 lb (1.36 kg)

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 621 K)
Doc. No. 6410A
Rev. Date: 11/1/2007

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 122 K)
Rev. Date: 12/28/2006

Available Models

Model Description      

CLXI-2DIM2

2 Channel Dimmer Module, 2 Feeds - International Version, 230V

 

 

 

 

Available Accessories

Model Description      

CAEN-2X1

Automation Enclosure, 2 modules high x 1 module wide

 

 

 

CAEN-4X1

Automation Enclosure, 4 modules high x 1 module wide

 

 

 

CAEN-4X2

Automation Enclosure, 4 modules high x 2 modules wide

 

 

 

CAEN-7X1

Automation Enclosure, 7 modules high x 1 module wide

 

 

 

CAEN-7X2

Automation Enclosure, 7 modules high x 2 modules wide

 

 

 

CAENIB-2X1

Automation Enclosure, 2 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X1

Automation Enclosure, 4 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X2

Automation Enclosure, 4 modules high x 2 modules wide - International Version

 

 

 

CAENIB-7X1

Automation Enclosure, 7 modules high x 1 module wide - International Version

 

 

 

CAENIB-7X2

Automation Enclosure, 7 modules high x 2 modules wide - International Version

 

 

 

CLTI-2DIM2

Terminal Block

 

 

 

CLTIBN-2DIM2

Circuit Breaker Terminal Block

 

 

 

CLXI-2IND

2 Channel Inductor Module - International Version, 230V

 

 

 

CLXI-4IND

4 Channel Inductor Module - International Version, 230V

 

 

 

Invitation to Tender

CLXI-2DIM2 (TXT - 846 B)
Letzte Änderung 11.11.2012