facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CLXI-1MC4

Motorsteuerungsmodul für 4 Motoren 230 Volt

Steuerung von 4 Motoren pro Kanal 8A. Anschluss erfolgt mit einer Phase (13 Ampere). Hardwareseitige Verriegelung der Relais ebenfalls enthalten. Pro Schaltschrank wird ein CAEN-BLOCK oder ein PAC2/PAC2M benötigt. Befestigung erfolgt auf Montageplatte. Maße: 175x192x87 mm.

As part of a complete Crestron lighting system, the CLXI-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 8 Amps or 1 HP, with a total module rating of 13 Amps.

The CLXI-1MC4 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-1MC4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLXI modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

Load Ratings
  Motor Control Channels 4
  Per Channel 8 Amps, 1 HP
  Module Total 13 Amps
  Load Types 3-Wire Bidirectional Motors
Power Requirements
  230 Volts AC, 50/60Hz, single-phase
Connectors on Module
  Module Interconnect (2) 5-pin 0.156 inch headers;
Cresnet/Override interconnect ports;
Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLXI-Series module using interconnect cable provided
Connections via CLTI or CLTIBN Terminal Block (sold separately)
  LINE (1) DIN rail terminal block, brown, line power input
  OPEN 1 - 4 (4) DIN rail terminal blocks, red;
Channel outputs "open"
  CLOSE 1 - 4 (4) DIN rail terminal blocks, yellow;
Channel outputs "close"
  N IN (1) DIN rail terminal block, blue, line input neutral
  N OUT 1 - 4 (4) DIN rail terminal blocks, blue, channel output neutrals
Buttons
  SETUP Used for TSID
LED Indicators
  PWR (green) Indicates line power is applied to the LINE terminal
  NET (yellow) Indicates communication with the control system
  1 – 8 (red x8) Indicates state of each channel
  SETUP (red) Indicates unit is in setup/manual mode
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 21 BTU/Hr at maximum load
Enclosure
  Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in any CAEN or CAENIB enclosure
Dimensions
  Height 7.59 in (19.27 cm)
  Width 6.92 in (17.57 cm)
  Depth 3.43 in (8.70 cm)
Weight
  3.00 lb (1.36 kg)

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 803 K)
Doc. No. 6409A
Rev. Date: 11/1/2007

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 149 K)
Rev. Date: 12/28/2006

Available Models

Model Description      

CLXI-1MC4

4 Channel Motor Control Module, Single Feed - International Version, 230V

 

 

 

 

Available Accessories

Model Description      

CAEN-2X1

Automation Enclosure, 2 modules high x 1 module wide

 

 

 

CAEN-4X1

Automation Enclosure, 4 modules high x 1 module wide

 

 

 

CAEN-4X2

Automation Enclosure, 4 modules high x 2 modules wide

 

 

 

CAEN-7X1

Automation Enclosure, 7 modules high x 1 module wide

 

 

 

CAEN-7X2

Automation Enclosure, 7 modules high x 2 modules wide

 

 

 

CAENIB-2X1

Automation Enclosure, 2 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X1

Automation Enclosure, 4 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X2

Automation Enclosure, 4 modules high x 2 modules wide - International Version

 

 

 

CAENIB-7X1

Automation Enclosure, 7 modules high x 1 module wide - International Version

 

 

 

CAENIB-7X2

Automation Enclosure, 7 modules high x 2 modules wide - International Version

 

 

 

CLTI-1MC4

Terminal Block

 

 

 

CLTIBN-1MC4

Circuit Breaker Terminal Block

 

 

 

Invitation to Tender

CLXI-1MC4 (TXT - 1018 B)
Letzte Änderung 11.11.2012