facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

CLXI-4HSW4

Relaismodul 230 Volt

Relaisbaustein mit 4 unabhängigen Relais mit Überspannungsschutz. 16 Ampere je Ausgang. Pro Schaltschrank wird ein CAENBLOCK oder ein PAC2/PAC2M benötigt. Befestigung erfolgt auf Montageplatte. Maße: 1757x1927x87 mm.

As part of a complete Crestron lighting system, the CLXI-4HSW4 module provides 4 independent channels of switching for high-inrush loads such as motors, HID lighting, and fluorescent ballasts, as well as incandescent, low-voltage, and neon/cold cathode lighting. Each channel is rated for 16 Amps or 1 HP, with a total module rating of 64 Amps when fed from four separate 16 Amp feeds. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.

An override feature allows each channel to be set to a preset state during setup. In the event that Cresnet communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.

The CLXI-4HSW4 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-4HSW4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLXI modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

Load Ratings
  Switch Channels 4
  Per Channel 16 Amps, 1 HP
  Module Total 64 Amps
  Load Types Incandescent, Fluorescent, Low-voltage, Neon/Cold Cathode, High-Intensity Discharge (HID), Motors
Power Requirements
  230 Volts AC, 50/60Hz
Connectors on Module
  Module Interconnect (2) 5-pin 0.156 inch headers;
Cresnet/Override interconnect ports;
Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLXI-Series module using interconnect cable provided
Connections via CLTI or CLTIBN Terminal Block (sold separately)
  LINE 1 - 4 (4) DIN rail terminal blocks, brown, line power inputs
  SW 1 - 4 (4) DIN rail terminal blocks, red, channel outputs
  N IN 1 - 4 (4) DIN rail terminal blocks, blue, line input neutrals
  N OUT 1 - 4 (4) DIN rail terminal blocks, blue, channel output neutrals
Buttons
  SETUP Used for manual channel activation and TSID
LED Indicators
  PWR (green) Indicates line power is applied to the LINE terminal
  NET (yellow) Indicates communication with the control system
  1 – 4 (red x4) Indicates state of each channel
  SETUP (red) Indicates unit is in setup/manual mode
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 42 BTU/Hr at maximum load
Enclosure
  Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in any CAEN or CAENIB enclosure
Dimensions
  Height 7.59 in (19.27 cm)
  Width 6.92 in (17.57 cm)
  Depth 3.43 in (8.70 cm)
Weight
  3.00 lb (1.36 kg)

Publications

Spec Sheet

Spec Sheet (PDF)

Manual

Manual (PDF - 516 K)
Doc. No. 6412
Rev. Date: 11/1/2005

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 129 K)
Rev. Date: 12/28/2006

Available Models

Model Description      

CLXI-4HSW4

4 Channel High-Inrush Switch Module, 4 Feeds - International Version, 230V

 

 

 

 

Available Accessories

Model Description      

CAEN-2X1

Automation Enclosure, 2 modules high x 1 module wide

 

 

 

CAEN-4X1

Automation Enclosure, 4 modules high x 1 module wide

 

 

 

CAEN-4X2

Automation Enclosure, 4 modules high x 2 modules wide

 

 

 

CAEN-7X1

Automation Enclosure, 7 modules high x 1 module wide

 

 

 

CAEN-7X2

Automation Enclosure, 7 modules high x 2 modules wide

 

 

 

CAENIB-2X1

Automation Enclosure, 2 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X1

Automation Enclosure, 4 modules high x 1 module wide - International Version

 

 

 

CAENIB-4X2

Automation Enclosure, 4 modules high x 2 modules wide - International Version

 

 

 

CAENIB-7X1

Automation Enclosure, 7 modules high x 1 module wide - International Version

 

 

 

CAENIB-7X2

Automation Enclosure, 7 modules high x 2 modules wide - International Version

 

 

 

CLTI-4HSW4

Terminal Block

 

 

 

CLTIBN-4HSW4

Circuit Breaker Terminal Block

 

 

 

Invitation to Tender

CLXI-4HSW4 (TXT - 860 B)
Letzte Änderung 11.11.2012