facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

GLS-SIM

Sensorinterface mit 2 Sensoreingängen

Sensorinterface mit 2 Sensoreingängen. Digitale Ein- und Ausgänge für bis zu 24 V DC, analoge Eingänge 0-10 V DC. 24 V / max. 1 A Ausgang zur Versorgung von externen Geräten. Einstellmöglichkeit der Betriebsart für Sensoren in IPAC und ILUX-Systemen. Installation in 68-er Hohlwanddose oder über Montagewinkel. Zum Anschluss von Tastern, Schaltern, Sensoren, Bewegungsmeldern usw.

The GLS-SIM is a compact interface device designed to allow Crestron Green Light™ sensors to be connected directly to a Cresnet control network. Cresnet® is the communications backbone for Crestron sensors, dimmers, keypads, touchpanels, shade controllers, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. The GLS-SIM installs easily at the sensor location, mounting conveniently inside the electrical box or exposed above the ceiling. Wiring connections to the network and sensor are facilitated using miniature screw terminals.

The GLS-SIM is compatible with Crestron GLS-series sensors, as well as with most 24 Volt-powered sensors from any manufacturer. Up to 1A @ 24VDC power is available* to support multiple sensors in parallel. The GLS-SIM actually includes two sensing inputs, each capable of sensing a contact closure, logic level, or 0-10V analog signal. When used with a Crestron IPAC or iLux™ system, setup is simplified using onboard DIP switches to select the sensor type (i.e. occupancy, photocell, partition, etc.) and operating mode (i.e. normally-open or normally-closed).

Key Features

 

  • Provides Cresnet connectivity for Crestron GLS-series and third-party sensors
  • Works with occupancy sensors, photocells, partition sensors, and more
  • Provides 24 Volts DC to power one or more sensors
  • Includes 2 independent sensing inputs
  • Supports contact-closure, DC logic, and 0-10V analog signals
  • Onboard DIP switches simplify setup for use with IPAC and iLux systems
  • Allows fully-programmable operation as part of any Crestron system
  • Compact module fits in an electrical box behind the sensor
  • Miniature screw terminals facilitate reliable wiring connections

Connectors
  NET (1) 4-pin 5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
  SENSOR (1) 4-pin 3.5mm detachable terminal block;
Sensor input comprised of 24VDC power output and (2) digital or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.25 Volts DC;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin;
Maximum Power Load: 1 Amp @ 24 Volts DC*
Controls
  ID CODE (2) Rotary DIP Switches;
Used for manually setting Cresnet ID;
‘00’ setting enables touch-settable ID (TSID)
  MODE (1) 4-position DIP switch;
Sets sensor type and operating mode for use with IPAC and CLS-C6 systems
  SETUP (1) miniature pushbutton, used for touch-settable ID (TSID)
LED Indicators
  PWR (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network
  NET (1) yellow LED, indicates communication with Cresnet system
  SETUP (1) red LED, used for touch-settable ID (TSID)
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 0% to 95% RH (non-condensing)
Power Requirements
  Cresnet Power Usage 1 Watt (0.04 Amps @ 24 VDC) (Does not include power draw of attached devices.)

* Actual load capability dependent upon the amount of available Cresnet power in the system.

Publications

Spec Sheet

Spec Sheet (PDF)

Installation and Operations Guide

Installation And Operations Guide (PDF - 1.1 M)
Doc. No. 6768B
Rev. Date: 10/14/2009

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 1.5 M)
Rev. Date: 12/31/2008

Revit Files

Revit (ZIP - 356 K)
Rev. Date: 9/2/2011

Available Models

Model Description      

GLS-SIM

Crestron Green Light Sensor Integration Module

 

 

 

 

Available Accessories

Model Description      

GLS-LCL

Crestron Green Light Photocell, Closed-Loop

 

 

 

GLS-LOL

Crestron Green Light Photocell, Open-Loop

 

 

 

GLS-ODT-C-500

Crestron Green Light Dual-Technology Ceiling Mount Occupancy Sensor, 500 Sq. Ft

 

 

 

GLS-ODT-C-1000

Crestron Green Light Dual-Technology Ceiling Mount Occupancy Sensor, 1000 Sq. Ft.

 

 

 

GLS-ODT-C-2000

Crestron Green Light Dual-Technology Ceiling Mount Occupancy Sensor, 2000 Sq. Ft.

 

 

 

GLS-ODT-W-1200

Crestron Green Light Dual-Technology Wall Mount Occupancy Sensor, 1200 Sq. Ft.

 

 

 

GLS-OIR-C-450

Crestron Green Light Passive Infrared Ceiling Mount Occupancy Sensor, 450 Sq. Ft.

 

 

 

GLS-OIR-C-1500

Crestron Green Light Passive Infrared Ceiling Mount Occupancy Sensor, 1500 Sq. Ft.

 

 

 

GLS-OIR-W-2500

Crestron Green Light Passive Infrared Wall Mount Occupancy Sensor, 2500 Sq. Ft.

 

 

 

GLS-LEXT

GL,SENSOR,LIGHT,EXTERIOR

 

 

 

GLS-PART

GL,SENSOR,PARTITION

 

 

 

CRESNET-HP-NP-TL-SP1000

Cresnet® "High-Power" Control Cable, non-plenum, teal, 1000 ft spool

 

 

 

CRESNET-HP-NP-TL-SP500

Cresnet® "High-Power" Control Cable, non-plenum, teal, 500 ft spool

 

 

 

CRESNET-NP-BK-B500

Cresnet® Control Cable, non-plenum, black, 500 ft box

 

 

 

CRESNET-NP-OR-B500

Cresnet® Control Cable, non-plenum, orange, 500 ft box

 

 

 

CRESNET-NP-TL-B250

Cresnet® Control Cable, non-plenum, teal, 250 ft box

 

 

 

CRESNET-NP-TL-B500

Cresnet® Control Cable, non-plenum, teal, 500 ft box

 

 

 

CRESNET-NP-TL-SP1000

Cresnet® Control Cable, non-plenum, teal, 1000 ft spool

 

 

 

CRESNET-NP-TL-SP500

Cresnet® Control Cable, non-plenum, teal, 500 ft spool

 

 

 

CRESNET-NP-YL-B500

Cresnet® Control Cable, non-plenum, yellow, 500 ft box

 

 

 

CRESNET-P-BK-SP500

Cresnet® Control Cable, plenum, black, 500 ft spool

 

 

 

CRESNET-P-OR-SP500

Cresnet® Control Cable, plenum, orange, 500 ft spool

 

 

 

CRESNET-P-TL-SP1000

Cresnet® Control Cable, plenum, teal, 1000 ft spool

 

 

 

CRESNET-P-TL-SP500

Cresnet® Control Cable, plenum, teal, 500 ft spool

 

 

 

CRESNET-P-YL-SP500

Cresnet® Control Cable, plenum, yellow, 500 ft spool

 

 

 

Invitation to Tender

GLS-SIM (TXT - 551 B)
Letzte Änderung 11.11.2012