facebook Google+ twitter flickr youtube in crestron
Produktkategorien
Produkt
Produktfoto

ANT-EXT-10

Abgesetztes Antennenmodul

Antenne zur Befestigung an der Außenseite beim Rackeinbau für CEN-RFGW-EX und CENI-HPRFGW 802.11a/b/g Wireless Access Points. Kabellänge 3 Meter. Einfache Montage mittels Magnetfuß.

Crestron® ANT-EXT Antenna Extenders are designed for use with many Crestron RF gateways and wireless access points, allowing the device to be installed in an equipment rack or similar enclosure while the antenna gets mounted outside the enclosure. It can also be used to enable placement of the device on a low shelf while allowing the antenna to be positioned at a higher elevation for optimal coverage.

The ANT-EXT is offered in 5 ft (1.5 m) or 10 ft (3 m) lengths. Each ANT-EXT features a magnetic weighted base with attached extension cable. The base can be placed on the top of a rack or cabinet, or on a shelf. Its strong magnet also allows it to be affixed to a vertical metallic surface such as the side of an equipment rack. Simply attach the antenna, which normally ships with the gateway or wireless access point, to the ANT-EXT base and position it for proper operation.

Works with the PMC2 and PMC2+ Prodigy® Media Controllers, CEN-RFGW-EX infiNET EX™ Gateway, CEN-HPRFGW High Powered RF Gateway, and CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point.

Cable Length
  ANT-EXT-5 5 feet (1.5 meters)
  ANT-EXT-10

10 feet (3 meters)

Base Dimensions
  Height 1.75 in (45 mm) without antenna
  Diameter 1.58 in 41 mm)
Weight
  3 oz (85 g)

Publications

Spec Sheet

Spec Sheet (PDF - 338 K)
Rev. Date: 10/3/2014

Manual

Manual (PDF - 1.18 M)
Doc. No. 7047A
Rev. Date: 8/19/2010

Available Models

Model Description      

ANT-EXT-10

10 ft Antenna Extender

     

Invitation to Tender

ANT-EXT-10 (TXT - 391 B)
Letzte Änderung 11.11.2012