facebook Google+ twitter flickr youtube in crestron


InfiNET™ Repeater

Repeater zur Erweiterung der Reichweite des C2N-MNETGW Empfängers. Cresnet Anschluss. Die Reichweite zwischen den InfiNET Teilnehmern liegt bei ca. 45 Metern. Maße: 99 x 63 x 32 mm.

The C2N-MNETRPT is a 2-way RF repeater designed to extend the coverage of an infiNET wireless network. Requiring only an AC power source, the C2N-MNETRPT can be installed discretely where needed to easily fill a "dead" space between any two or more infiNET devices.

Groundbreaking Crestron® infiNET wireless technology provides reliable 2-way communications throughout a home or office structure without the need for physical control wiring. Up to 30 infiNET dimmers, switches, and other devices can be linked to a control system via a single RF gateway.

Employing a 2.4 GHz mesh network topology, every infiNET device actually functions as an RF repeater, increasing effective range and reinforcing the complete network by providing multiple redundant signal paths within the mesh network. Simply adding more devices, or a C2N-MNETRPT repeater, effectively increases the range, strength, and reliability of the network.

Setting up a complete infiNET network is simple, utilizing dynamic discovery to locate and acquire each device and repeater automatically.

Key Features


  • 2-way RF wireless repeater
  • infiNET mesh network technology
  • Extends indoor range by up to 150 feet


Crestron and infiNET are trademarks of Crestron Electronics, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others.

  RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant
  RF Transmitting Power 10 mW
  Range (typical) 150 feet indoor, 250 feet outdoor, subject to site-specific conditions;
Range is increased by adding additional devices or C2N-MNETRPT repeater
Controls & Indicators
  PWR (1) green LED, indicates power supplied from power pack
  MNET (1) yellow LED, indicates communication with the infiNET network
  SETUP (1) Recessed pushbutton with red LED, used to link the repeater to a gateway
  COM (1) 6-pin RJ11 female;
RS-232 PC console port
  PWR (1) 2.5mm barrel DC power jack;
12 Volt DC power input;
PW-1205 power pack included
Power Requirements
  Power Pack 0.5 Amps @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205 included
  Metal with black finish, freestanding or surface mount
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  (Without antenna)
  Height 1.24 in (32 mm)
  Width 2.47 in (63 mm)
  Depth 3.88 in (99 mm)
  8.3 oz (240 g)
  All the features and specifications of the C2N-MNETRPT except:
  Power Requirements
  Power Pack 1.5 Amps @ 12 Volts DC;
230 Volts AC, 50 Hz power pack, model PWI-1215 included


Spec Sheet

Spec Sheet (PDF)


Manual (PDF - 1.9 M)
Doc. No. 6335A
Rev. Date: 3/1/2007

Reference Guide

Reference Guide (PDF - 3.6 M)
Doc. No. 6689C
Rev. Date: 11/25/2009
Note: Best Practices for Installation and Setup of Crestron RF Products

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 172 K)
Rev. Date: 6/27/2006

Available Models

Model Description      


infiNET Repeater





infiNET Repeater - International Version, 230V





Included Accessories

Model Description      


Power Pack, Wall, 12VDC, 0.5A, 120VAC
Included Quantity for C2N-MNETRPT: 1





Power Pack, Desktop, 12VDC, 1.5A, 230VAC
Included Quantity for C2NI-MNETRPT: 1




Invitation to Tender

Letzte Änderung 29.10.2014