Sonnex™ Sonnex™ ist das High End Multiroom System für digitale und analoge Audiosignale ohne Komprimierung. Ausbaubar auf bis zu 72 Räume, durch Verwendung von 1 x SWAMPI-24X8 und 8 x SWAMPIE-8.
Multiroom Expander mit Übertragung bis zu 65 m über ein geschirmtes CAT5 Kabel. Ein CAT5 Eingang empfängt alle 24 Audioquellen und Steuerdaten von der SWAMPI-24X8, 4 Stereo Kanäle 240 Watt an 4 Ohm/ 140 Watt an 8 Ohm je Ausgang. Beliebige Zonen können gebrückt werden, um dann 400 Watt an 8 Ohm zu erhalten.
The SWAMPE-4 is a 4-zone expander for the Sonnex® Multiroom Audio System (SWAMP-24X8) from Crestron®. It adds 4 stereo amplified zones to the Sonnex system, with the option for installation at the central equipment rack or at a remote location near the rooms it serves. The latter "decentralized" approach has the benefit of minimizing the amount of speaker wiring required, affording higher performance and efficiency, and a faster, easier and less expensive installation.
Integrated Audiophile Amplifier The SWAMPE-4 features the same custom hybrid amplifier design as the SWAMP-24X8, delivering the warmth and neutrality of a fine Class AB amplifier with all the efficiency benefits of modern Class D. Each of its 8 channels (configured as 4 stereo zones) delivers 140 Watts into 8 Ohms, or 240 Watts into 4 Ohms, and any two adjacent outputs can be bridged to produce 400 Watts per channel at 8 Ohms. Even with such incredible power, the SWAMPE-4 runs cool and efficiently, and requires only three rack spaces for mounting. Each zone is individually controllable to save energy by turning off any unused channels.
Digital Signal Processing Each zone features independent DSP for optimal sound quality and control in every room. Sonnex DSP capabilities include the choice of graphic or parametric 5-band EQ, dynamic range control, volume, bass, treble, balance, loudness, mute, mono summing, and five selectable tone profiles. For passive subwoofer applications, a choice of 2nd or 4th order active crossover filters can be set using the parametric EQ, leaving the four remaining EQ filters available for room correction and tonal enhancement.
Output Bussing Output bussing allows multiple zones to function as one, whether fed from the SWAMPE-4, the SWAMP-24X8, or another Sonnex Expander. Output bussing is ideal for grouping adjacent listening areas together or associating a subwoofer with its stereo speaker pair. Volume Offset adjustments allow for balancing the levels of each bussed zone for smooth, even coverage.
70/100V Option Any zone output can be converted to 70 or 100 Volt using one or more Sonnex Output Transformers (SAT-70V/100V-2 or SAT-70V/100V-4). Also known as "constant-voltage", 70 Volt and 100 Volt speaker systems allow for long wire runs using small-gauge wire, with the potential for connecting numerous speakers per circuit. Typical applications include outdoor speaker zones, commercial retail spaces, hallways and common areas.
Simple, Versatile Installation The SWAMPE-4 can be installed along with the SWAMP-24X8 at the central equipment rack, or separately at a remote location. It interfaces with the SWAMP-24X8 via a single CAT5e shielded twisted pair (STP) cable up to 200 ft (61 m) in length. This length can be increased to 2000 ft (610 m) using multimode fiber optic cable with the S-EXT1-S Sonnex Link over Fiber Extender. Plug-and-play connectivity affords an extremely easy installation, with full control access to all the SWAMPE-4 functions provided through the SWAMP-24X8.
Please see the SWAMP-24X8 spec sheet for complete Sonnex system information.
4-Zone Sonnex® expansion with amplified outputs
140 Watts/Ch. @ 8 Ohms, 400 Watts/Ch. bridged
70/100 Volt "constant-voltage" output options available
Advanced DSP, mono summing, and output bussing per zone
Sonnex Speaker Protect™
Individual zone power control and global standby
Remote fault monitoring
Heavy duty detachable terminal blocks
Single-cable interface to SWAMP-24X8 via Sonnex Link
Low power consumption, cool-running operation
Three-space rack mountable
Item(s) sold separately.
For connection of the Sonnex Link between the SWAMPE-4 and SWAMP-24X8, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable. The maximum cable length using DM-CBL-8G or CAT5e is 200 ft (61 m). For longer distances, use the S-EXT1-S Sonnex Link over Fiber Extender.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.