facebook Google+ twitter flickr youtube in crestron
Kontakt:  +49 731 96281-0


Funk Thermostat – infiNET EX®

Bidirektionaler Funk Thermostat, steuert Fußbodenheizung, Lüftungsanlage oder Heizungspumpen, einfache kabellose Montage in einer um 90 Grad gedrehten One-Gang-Box, automatische Erkennung der Komponenten am Gesamtsystem, keine Konfiguration oder Programmierung erforderlich. Mit neuer infiNET EX® Funktechnologie, unterstützt externe Temperatursensoren. Gut für Renovierung/Nachrüstung geeignet. Farbe: weiß

The CHV-TSTATEX is a wireless thermostat featuring infiNET EX™ technology. The CHV-TSTATEX installs just like a conventional thermostat because no extra wires are needed to connect to the control system. Although functional as a standalone thermostat, the CHV-TSTATEX delivers enhanced functionality as part of a complete Crestron® automation system. Integrating HVAC with a Crestron system can help lower energy bills and increase user friendliness.

The CHV-TSTATEX is designed for one- or two-stage heating and one- or two-stage cooling control of baseboard, forced air, heat pump[1], and dual-fuel heat pump[1] HVAC systems. The large backlit LCD display provides a clear view of temperature, set point, system mode, fan mode, system status, and setup functions. Climate control features include separate heating and cooling set points, and adjustable anticipators to prevent overshooting the desired temperature. Continuous fan operation can be selected when needed for increased circulation.

Fan Coil Unit Support
The CHV-TSTATEX-FCU model of the infiNET EX™ thermostat provides the functionality of controlling fan coil units[2]. Aesthetically identical to the base model, the CHV-TSTATEX-FCU has custom firmware, display programming and terminal labels designed for 3-speed fan applications. The CHV-TSTATEX-FCU supports on/off control of the valves and the fan in 4-pipe fan coil applications, eliminating the need for an additional device dedicated to controlling the fan coil unit itself.

infiNET EX™ Communications
Built on steadfast infiNET™ technology, infiNET EX is the new standard in 2-way wireless connectivity that can handle installations in even the most urban settings. The redundant nature of its mesh networking technology means that a command will never be missed, resulting in faultless operation - something that is of the utmost importance when it comes to HVAC control and home automation. The CHV-TSTATEX harnesses this cutting edge wireless connectivity which affords it a level of robustness and dependability above other solutions.

Automation System Integration
The wireless connection to the control system allows the functions of the CHV-TSTATEX to be controlled from touchpanels, keypads, wireless remotes, computers, or even a mobile device. It supports unlimited flexibility for remote control, scheduling, and integration with other devices and systems. However, in the event that communication with the control system is disrupted for any reason, the CHV-TSTATEX will remain operable to control the HVAC system.

Easy Installation
System design and installation using infiNET EX thermostats could not be easier. Because no control wires are required, the CHV-TSTATEX can be installed just like any conventional thermostat.

To simplify installation, physical switches are provided for the most critical configuration options, including heat/cool type, heat pump behavior, power settings, number of heating/cooling stages, and fan options. These settings allow HVAC contractors to install and test the thermostats prior to the appearance of a Crestron system integrator.

An infiNET EX gateway such as the CEN-RFGW-EX is needed for communications. Setting up a complete network of infiNET EX devices is simple, utilizing dynamic discovery (self-install) to locate and acquire each RF device automatically. Setting the ID of each device employs the same convention as Crestron's familiar TSID method, and each device is programmable using Crestron SIMPL Windows, SystemBuilder™ or D3Pro™ software just like any wired Cresnet device. Even firmware updates are performed over the wireless network.

No further action is required to configure the infiNET EX network. Each device assigned to a common gateway automatically behaves as a wireless expander[3] for any other devices within range (approximately 150 feet indoors), and additional expanders may be added if necessary. The infiNET EX gateway monitors each device on the network at all times, ignoring any other 2.4 GHz signals. It reconfigures the entire network automatically in response to new sources of interference and other changes in RF conditions.

Remote Sensors
Optional remote temperature sensors can be connected to the CHV-TSTATEX for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-TSTATEX to be installed out of view. For heat pump-type systems, outdoor temperature can be monitored to optimize system performance. Compatible sensors include the CHV-RTS and the CHV-RSS.

Key Features


  • Wall mount heat/cool thermostat for baseboard, forced air, and heat pump[1] HVAC systems
  • Crestron system integration via infiNET EX wireless network
  • Saves on energy costs with advanced programming abilities
  • Supports two remote temperature sensors
  • Fail-safe mode allows operation in event of control system failure
  • Backlit LCD display
  • Fan coil unit control[2] (CHV-TSTATEX-FCU model only)
  • Available in white, black, or almond


  1. Heat pump systems require an outdoor temperature sensor; contact Crestron for additional design assistance.
  2. 4-pipe fan coil units are supported.
  3. CHV-TSTATEX must be powered by a 24 volt source to enable repeater functionality.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

Crestron, the Crestron logo, infiNET EX, SIMPL, SIMPL+, SystemBuilder, D3Pro and 3-Series Control System are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

  RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.4 compliant
  Range (typical) 150 feet indoor, 250 feet outdoor;
Subject to site-specific conditions; range is increased by adding additional devices or CLW-RFEXP-EX wireless expander
  Gateway Requires a CEN-RFGW-EX RF gateway or MC3 3-Series Control System™.

7 terminal blocks comprising the following (top row, listed left to right):
RS2: Remote sensor 2 (outdoor)
RS1: Remote sensor 1 (indoor)
RSR: Remote sensor return
RSR: Remote sensor return (duplicated for easier wiring)
W2: Heat, second stage
W1: Heat, first stage
RH: Heat return

7 terminal blocks comprising the following (bottom row, listed left to right)
B: Auto changeover (inverted); switched to RC during heat calls
O: Auto changeover; switched to RC during cool calls
G: Fan
Y2: Cool, second stage
Y1: Cool, first stage
RC: Cool return
C: 24 VAC common

7 terminal blocks comprising the following (top row, listed left to right):
RS2: Remote sensor 2 (outdoor)
RS1: Remote sensor 1 (indoor)
RSR: Remote sensor return
RSR: Remote sensor return (duplicated for easier wiring)
N/C: Unused
W: Heat
N/C: Unused

7 terminal blocks comprising the following (bottom row, listed left to right):
24C: 24V supply
R: 24V return
Y: Cool
N/C: Unused
GH: Fan high
GM: Fan medium
GL: Fan low

  MODE Cycles through available System Modes: OFF, HEAT, AUX HEAT ONLY (for heatpump or dual-fuel systems only), and COOL
  FAN Toggles fan setting between FAN AUTO and FAN ON
  RAISE Raises the set point
  LOWER Lowers the set point
  HOLD (combination) Pressing MODE and FAN buttons simultaneously enters/exits HOLD mode
  SETUP (combination) Holding the FAN button, then pressing the RAISE and LOWER buttons simultaneously for 5 seconds enters SETUP mode; pressing mode button advances to next setup parameter/function; pressing RAISE or LOWER adjusts value of current setup parameter or executes current setup function; pressing FAN button exits SETUP mode
  Type Backlit LCD with (2) large 7-segment digits, (2) small 7-segment digits, (14) dedicated symbols;
  Displays ambient temperature, set point, system mode, fan setting, call activity, low battery, RF or control system communication errors, firmware download progress, setup parameter/function and value
Measurement Range
  Ambient Temperature -10° to 110°F (-23° to 43°C)
  Display Limits -9° to 99°F (-9° to 43°C)
Temperature Tolerance
  Over Full Range ±1ºF (±0.5ºC)
  At Room Temperatures ±1ºF (+0.4/-0.2ºC)
Setpoint Range
  Heat Set Point 38° to 89°F (3° to 32°C)
  Cool Set Point 59° to 99°F (15° to 37°C), or 38° to 99°F (3° to 37°C) extended cool mode enabled
Relay Rating
  1 Amp @ 40 Volts DC or 24 Volts AC (nominal)
  Temperature -10° to 110°F (-23° to 43°C)
  Humidity 10% to 90% RH (non-condensing)
Power Requirements
  24V 0.24 Watts (10 mA) @ 24 Volts AC, supplied by heating or cooling system
  Battery (2) AA batteries required, estimated 1 year normal operation
  Injection-molded plastic, surface-mountable to the front of a horizontally oriented 1-gang electrical box
  Height 4.50 in (11.43 cm)
  Width 5.53 in (14.05 cm)
  Depth 1.03 in (2.60 cm)
  6.7 oz (190 g)


Spec Sheet

Spec Sheet (PDF - 712 K)
Rev. Date: 6/2/2014

Quick-Start Guide

Quick-Start Guide (PDF - 358 K)
Doc. No. 6990B
Rev. Date: 1/27/2012

Quick-Start Guide

Quick-Start Guide (PDF - 234 K)
Doc. No. 7232A
Rev. Date: 10/17/2011
Note: Quickstart for CHV-TSTATEX-FCU

Reference Guide

Reference Guide (PDF - 1.24 M)
Doc. No. 6689E
Rev. Date: 5/23/2014
Note: Best Practices for Installation and Setup of Crestron RF Products

Installation and Operations Guide

Installation And Operations Guide (PDF - 1.14 M)
Doc. No. 6989C
Rev. Date: 1/31/2013

Installation and Operations Guide

Installation And Operations Guide (PDF - 1.09 M)
Doc. No. 7206C
Rev. Date: 1/31/2013
Note: Manual for CHV-TSTATEX-FCU

Engineering Specs

Engineering Specs (.DOCX - 39 K)
Rev. Date: 1/3/2013
Note: FCU Thermostat/HVAC Controller Construction Specifications Institute documents for architects, engineers, specifiers and contractors.

CADs, Drawings and Revit Files

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 153 K)
Rev. Date: 3/30/2010

Available Models

Model Description      


infiNET EX® Thermostat, Almond Textured



infiNET EX® Thermostat, Black Textured



infiNET EX® Thermostat, White Textured



infiNET EX® Thermostat, Fan Coil Unit, Almond Textured



infiNET EX® Thermostat, Fan Coil Unit, Black Textured



infiNET EX® Thermostat, Fan Coil Unit, White Textured



Available Accessories

Model Description      


Remote Temperature Sensor



Remote Slab Sensor and Outdoor Temperature Sensor



infiNET EX® Wireless Gateway



infiNET EX® Wireless Gateway w/PoE Injector



3-Series Control System® w/infiNET EX®



DIN Rail 3-Series® Automation Processor w/infiNET EX®



infiNET EX® Wireless Expander, Ground Pin Down, White Textured



Crestron Green Light® Wireless Expander for infiNET EX® Networks


Invitation to Tender

Letzte Änderung 11.11.2012